I have one of those... I think the darned thing's broken. It hasn't produced anything Estoril yet...Originally Posted by joeybananaz18
Capo
I have one of those... I think the darned thing's broken. It hasn't produced anything Estoril yet...
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Big Earner
LOL
--Trevor--
Vancouver, BC
Enforcer
Deleted post
Last edited by Reasoned1; 02-26-2018 at 04:31 PM.
Enforcer
I can easily store them under the car, too--and the hoses are all quick-disconnect. Also, I use those rubber adapters, on top of the rubber lifting blocks, that interlock with the lift pads on the car--works great! By the way, the optional SUV lift risers showed up today, and they're super heavy-duty--actually seem worth the extra $220.
Enforcer
Pulled out my rear diff, and did a bunch of deep-cleaning of the subframe and surrounding area. Can't find my gd gasket-maker, so I had to order more (putting a finned cover on my new MFactory LSD).
Enforcer
Bought new shoes for the front today... Replacing the 225’s with 235’s;
The outer shoulders were worn pretty badly... A bit too much ‘spirited driving’ maybe, and not enough negative camber;
The P.O. put Pilot Sports on the front and PSS’s on the rear...not sure why. So I’m putting PSS’s all around now.
Capo di tutti capi
Awesome. Diff cover is OEM or specific to MFactory.com?
Sent from my SM-G955U using Tapatalk
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Big Earner
I think Garagistic makes a finned diff cover for the non-M too?
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Campieri
The finned cover on my diff is OEM... Z4M I think...
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Enforcer
It's the same as the Z4 cover... If I was smarter, I would've asked MFactory to include one (their's is standard). Oh well... it taught me how to get it off with a dead-blow hammer--no mercy!
Posting Permissions
Reply With Quote
