That steering wheel looks stupid in your car. You should get rid of it immediately. Bring it along with you next time you are here and I will take it off your hands.
That steering wheel looks stupid in your car. You should get rid of it immediately. Bring it along with you next time you are here and I will take it off your hands.
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
It just takes this cover and about 3-4 hours of pissed off taping, stitching, backing up, restitching, getting a beer, stitching, cursing, taking a walk, stitching, cursing, cursing, trying to teach the dog to stitch, cursing, stitching, and voila!
I think your airbag needs adjustment.
That cover actually looks very good. I haven't seen any covers I liked because they usually have noticeable imperfections in the application, but yours looks spot on.
Sent from my Pixel using Tapatalk
+1
I went and got the airbag recall service last month, and just a few days ago I noticed my driver side airbag cover was sticking out in the corner so i gave it a good push and now it is flush with the dash again. But then I noticed my cube trim is wobbly, like the clips holding it in place are broken or something
~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality
Awesome looking steering wheel.
Sent from my SM-G955U using Tapatalk
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
Glad the puller worked for you. Some of the velcro pads are off my mats, too. I didn't think about stitching them on. I was going to try some adhesive. Stitching looks more permanent.
__________________________________________________ _____
2005 BMW 330Ci ZHP Jet Black/Black with aluminum cube
Bone stock at the moment
i gave up on the stitching cover job attempt. just bought a Coby wheel instead. it's just money right?
your job looks great tho.
--Wes--
04 330i ZHP Oxford Green/Natural Brown
04 330Ci ZHP Silvergrey/Alcantara (RIP)
dude, that steering wheel cover looks great! still probably worth the effort for the cost paid, right?
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
2012 128i M Sport