Clean and blow dry my car! Done in 20 minutes.
![]()
Clean and blow dry my car! Done in 20 minutes.
![]()
--Trevor--
Vancouver, BC
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Yeah. Never had a problem. Dirt is always just being pushed away with falling water. But maybe the Canadian dirt is better.wheels take me 30 seconds a corner. I have a wheel brush with long bristles. It gets the face, the inside spokes, and spoke ends easily! Again I just use running water and it’s clean. I just do it when I start seeing a different layer on the wheel.
--Trevor--
Vancouver, BC
I would never try that with a black car. One wrong move, and it's game over.
-Corey
2003 Blue ZHP Sedan @ 210k
Dead due to damaged valve. Parts are being transferred to a wagon:
2003 325iT Japanrot 6MT @ 230k
Yeah, I would never wash a car without soap... you want as much lubrication between the wash mitt and the paint as possible to prevent scratching. It gliding easily doesn't mean it isn't scratching! Just be careful my friend - Estoril is too nice of a color to scratch!![]()
I dried the M2 like that the other day because I was in a hurry
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers