Got access to a 3d printer?Originally Posted by 704sw
https://www.stlfinder.com/model/bmw-...N3zB9E/7581714
Sent from my iPhone using Tapatalk
Messaggero
Got access to a 3d printer?
https://www.stlfinder.com/model/bmw-...N3zB9E/7581714
Sent from my iPhone using Tapatalk
Soldier
Picked up a Turner Motorsports rear strut bar as a scratch and dent deal from ECS for 75% off.
Enforcer
Drove it for the first time in 3 months. Man I almost forgot how fun these cars are. Felt like a rocket ship compared to my Nissan nv200 work van!
Sent from my iPhone using Tapatalk
Messaggero
Getting the windshield replaced on the wife’s X5 at the moment.
-Jeff | '19 JGC WK2
Sold: '03 ZHP
"There is a straight six engine at the front, a manual gear box in the middle, and drive goes to the back. That's page one, chapter one from the petrolsexual handbook." - Jeremy Clarkson
Wiseguy
New battery installed. The old one was so dead, I had to use the key to get in the boot. Function memory also reset itself; mpg, trip mi...
Sent from my iPhone using Tapatalk
Dinan; Hign Flow Intake System, & Strut Tower Brace
Turner Motorsports; Underdrive Power Pulleys
Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
Stewart High Performance Water Pump
Hawk High Performance Street 5.0 Brake Pads
Brembo Rotor
The purposeful face of a formidable athlete:
The spine-tingling 330i Performance Package.
Purchased CPO on 12/23/2006 with 28,090 miles
Messaggero
Installed a westfalia rear hitch model 303230 to the car. This one is detachable. I still need to do some wiring which I'm still up in the air for the westfalia 13 pole harness or just go with a generic one. You can see the other ones they have here. https://www.schmiedmann.com/en/bmw-E46/catn-ol?q=hitch
I don't have the bumper on yet because one of the bumper bolts broke. So I have to get another rear bumper carrier or try to take the broken bolt out.
Also, does anyone have a rear diffuser? I am looking for one and a roof rack.
Sent from my Pixel 2 using Tapatalk
Last edited by Tnhl1989; 01-26-2019 at 03:34 PM.
Tony's ZHP "Wulf" '03 Silver Gray | Valentine 1 Radar Detector| Alcantara | BMW Performance Intake | F10 M5 Knob | Auto-dim Retrofit | BMW Alarm | Performance Grilles | OEM Roof Rack | Rain Light Sensor Retrofit | Eonon D5150 Head Unit | BMW OEM Clear Lens
Messaggero
That's a nice one. I didn't know thsy wiring is different. I thought it is plug and play.Installed a westfalia rear hitch to the car. I still need to do some wiring which I'm still up in the air for the westfalia 13 pole harness or just go with a generic one.
Sent from my Pixel 2 using Tapatalk
I am thinking about the hitch for the Touring. I would love to see pictures with pumper install.
Sent from my SM-G900V using Tapatalk
Enforcer
Gloss black and Tri-color. Need the weather to cooperate long enough to get a good cleaning so I can start the paint correction.
Sent from my iPhone using Tapatalk
Big Earner
I think I have a roof rack in the garageInstalled a westfalia rear hitch model 303230 to the car. This one is detachable. I still need to do some wiring which I'm still up in the air for the westfalia 13 pole harness or just go with a generic one. You can see the other ones they have here. https://www.schmiedmann.com/en/bmw-E46/catn-ol?q=hitch
I don't have the bumper on yet because one of the bumper bolts broke. So I have to get another rear bumper carrier or try to take the broken bolt out.
Also, does anyone have a rear diffuser? I am looking for one and a roof rack.
Sent from my Pixel 2 using Tapatalk
Enforcer
Lots of parts to install:
Installed rear shocks today, the car feels MUCH better:
-Corey
2003 Blue ZHP Sedan @ 210k
Dead due to damaged valve. Parts are being transferred to a wagon:
2003 325iT Japanrot 6MT @ 230k
Posting Permissions
Reply With Quote
