Can anyone take a top and side pic of their exhaust tips in relation to the diffuser? Maybe even measure for me?
They are sticking out too far on my custom muffler and I'm going to have them moved back but I need reference point...
Campieri
Can anyone take a top and side pic of their exhaust tips in relation to the diffuser? Maybe even measure for me?
They are sticking out too far on my custom muffler and I'm going to have them moved back but I need reference point...
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Enforcer
I had these on hand.
Sent from my Pixel 2 XL using Tapatalk
-Corey
2003 Blue ZHP Sedan @ 210k
Dead due to damaged valve. Parts are being transferred to a wagon:
2003 325iT Japanrot 6MT @ 230k
Big Earner
I know Tapatalk image compression will be garbage, but hopefully this helps. Based on DeathTrap’s pictures my Magnaflow tips sit a little further in than OE.Originally Posted by Sockethead
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Enforcer
I like rake, it looks good on a larger car like the E38. It might be corny on the E46. I wish the seller was closer to do a test fit.
Sent from my Pixel 2 XL using Tapatalk
-Corey
2003 Blue ZHP Sedan @ 210k
Dead due to damaged valve. Parts are being transferred to a wagon:
2003 325iT Japanrot 6MT @ 230k
Campieri
I grabbed one of DeathTrap's pics, then added arrows to them. Orange = 20 mm. Yellow = 35 mm.
2005 IR / black / 6MT159,000 miles
Campieri
Awesome! Thanks for the help fellas!
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Capo
This is what I have for my Corsa exhaust, Rob.
Sent from my Pixel 3 using Tapatalk
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Campieri
They stick out a lot further than the other two. That's about where mine are now... maybe slightly further. I want them tucked in a bit.
My Corsa was like Spencer's.
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Soldier
Still need pics/measurements of OEM?
Campieri
I think I'm good, thanks!
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Posting Permissions
Reply With Quote
