What did you do for your ZHP/ BMW / MINI today? #2

[Oli77]

Holly shine! (to be polite)

And Holly crap on the OFHG, must have been leaking for a long time!

[Fenrir]

THAT is clean. Nice work!!

Sent from my Moto Z3 Play using Tapatalk

[DaveInMD]

Shiiiiiiinnnnnnneeee. I think that raises the bar.

Sent from my Pixel 3a using Tapatalk

[Will]

Good work, fellas!

Wow, that's some gunk on that OFH, must of felt good to get it all clean!

Sweet shine, John!

[pedro2u]

Looks good, I had the exact same wheel for 6-8ish months.

It felt very similar in thickness to my Coby rewrapped wheel, which is a little meatier than the OE ZHP and M3 wheels, but not a huge margin. Or do you mean the diameter of the wheel is bigger?

I was really impressed with the quality of the wheel, but I just couldn't get used to the flat bottom when I was making turns. Grabbing a straight piece (or worse, the angled portion) when you're expecting a curve was just really weird. The super aggressive thumb slots were awesome on the track since your hands never leave 3 and 9. The easier ingress/egress from the driver seat was also great.

Well, took almost 7 weeks to receive, but the new wheel came today (I'm sure Covid added to the transit time) and it amazing. First of all, it took 10 minutes to unwrap it (it's so well protected for shipment). And probably an hour to remove the old wheel, transfer the bits over to the new wheel, and reinstall it. I erred on the side of caution and disconnected the battery anyway. Jamming that screwdriver in the slots behind the wheel to release the airbag made me have second thoughts.

Here's a few photo's

[704sw]

Well, took almost 7 weeks to receive, but the new wheel came today (I'm sure Covid added to the transit time) and it amazing. First of all, it took 10 minutes to unwrap it (it's so well protected for shipment). And probably an hour to remove the old wheel, transfer the bits over to the new wheel, and reinstall it. I erred on the side of caution and disconnected the battery anyway. Jamming that screwdriver in the slots behind the wheel to release the airbag made me have second thoughts.

Here's a few photo's

Looks great! Based on that insane amount of cellophane I’d say it’s definitely the same seller lol. I love the leather wrapped lower trim (I kept that piece when I sold the wheel).

[pedro2u]

Looks great! Based on that insane amount of cellophane I’d say it’s definitely the same seller lol. I love the leather wrapped lower trim (I kept that piece when I sold the wheel).

thanks, definitely great workmanship! Now what to do with the alcantara wheel which is in pretty good condition

[28firefighter]

That is a beautiful wheel - I really really love the flat bottom.

[johnrando]

Thanks all! I always say, nothing better than a clean black car in the right light (shade). Trust me, plenty of blemishes around but it's nice to know in general, Ness still shines ur purdy.

Re: steering wheel, I agree, that's a beaut!

Sent from my SM-G988U using Tapatalk

[fredo]

thanks, definitely great workmanship! Now what to do with the alcantara wheel which is in pretty good condition

Steering wheel looks really nice ! FYI, I sold my alcantara one recently for $250 shipped.

http://www.zhpmafia.com/forums/showt...el-250-shipped