Those who have taken their trunk handle off - was this gasket sandwiched between the handle and the trunk itself? I just took mine off to install a reverse camera and it was missing.
Messaggero
Those who have taken their trunk handle off - was this gasket sandwiched between the handle and the trunk itself? I just took mine off to install a reverse camera and it was missing.
2004 BMW 330CI ZHP (well, technically ZAM)
Messaggero
Yup, just sandwiched.Originally Posted by t.er
Messaggero
Thank you. Luckily the local stealership is on-par with pricing from ECS Tuning (which is only $4 USD more than FCP Euro) with the conversion rate so at least I can install this fairly soon!
2004 BMW 330CI ZHP (well, technically ZAM)
Big Earner
Anyone know of or use a good company for CF work? I wanna have an 8pc interior trim for sedan and steering wheel trim done?
2005 BMW 330i ZHP - BMWP calipers/intake/strut bar/shifter, M3 CSL front/M3 rear rotors, Coby wraps interior, BBS CH wheels, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
Enforcer
I believe NelsonRacingWheel is a great company, Owner/Manager owns a ZHP coupe. I had shopped them for a dry carbon alternative to our cubed trim a while back but I wasn’t ready for the price at the time. Be ready to pay a premium, or at the very least source a set of wooden trim to do this on a spare set. Good luck!
Sent from my iPhone using Tapatalk
Enforcer
Does anyone have a way of contacting terraphtm? Want some coding done and I know it’s something he could do. Lost track of him a while back and haven’t been able to get a response since
Sent from my iPhone using Tapatalk
Big Earner
I see his username somewhat frequently on Reddit. You could try PM’ing him on there if you’re a Reddit user.
And FWIW it’s spelled TerraPhantm.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Enforcer
I don’t use reddit, I guess I’ll have to hop on there one of these days.
Thanks for that!
Sorry I haven’t responded, Tapatalk refuses to load any of my messages without an error message -_-.... or load a single photo
Sent from my iPhone using Tapatalk
Enforcer
Need ideas on what else could be wrong.
Naturally with all this shut down garbage the zhp sits a lot so i make an effort to drive it for about half hr every weekend, but when i come home and turn it off the oil light goes yellow and stays on for about 10 seconds.
- Checked the oil this Sunday and level seems fine
- Oil change was done Sep 2019 at 62.8k miles, and it’s at 64.6k now. Oil level sender was changed at this visit as well
- OPG was changed Oct 2018 at 57.7k miles
- Engine bay looks clean with no signs of leak
Sent from my iPhone using Tapatalk
Enforcer
It's a bit difficult to see the oil level from this picture, but the entire rectangular block was wet. Car must not have been leve where it was parked because if you flipped over the stick, the rectangular block was only wet 1/3 of the way up on the other side.
Posting Permissions
Reply With Quote
