These trims have been falling off all over the place.
Do all of these have a purpose and needing to come off, i.e., is there a downside to gluing these permanently right on?
For example, I need to replace my rear left window regulator... will this trim be needed to pop off and back in if there are screws in there that need to be removed to make such repairs?
I am sure this has happened to others, so if we cannot perma-glue it, what's the best DYI, considering that these are all bending a lot so there will be a lot of negative pressure on the door so any average glue will not hold this in place.
FYI for one of the other trims, I did leave it outside for like 3 months with weights on both sides to "bend it back" and it did bend it back to about 95% of the original, so I guess that might work again, but maybe there is a better solution?