LKM recoding

[derbo]

Seems like that's exactly what that would do. What I'm not sure about is brightness

I'll try it out when I get a chance.

[trancenation]

Does anyone know if I can use INPA to enable the rear foglight?

Thanks.

[Aeternalis]

Does anyone know if I can use INPA to enable the rear foglight?

Thanks.

I think you'll need a euro LCM as well.

[cakM3]

I did not need a Euro LCM to have rear fogs work on my ZHP. Just a Euro faceplate. Everything is functional


Sent from my iPhone6S using Tapatalk

[QC_ZHP]

I did not need a Euro LCM to have rear fogs work on my ZHP. Just a Euro faceplate. Everything is functional


Sent from my iPhone6S using Tapatalk

+1. All you need is the faceplate with the rear fogs button and it works I believe.

[cakM3]

+1. All you need is the faceplate with the rear fogs button and it works I believe.

For sedans, yes. With coupes you need to install additional wiring from the LCM to the rear fogs...

[QC_ZHP]

For sedans, yes. With coupes you need to install additional wiring from the LCM to the rear fogs...

Like i needed another reason to love sedans more...

[trancenation]

I do have a Euro Faceplate with the rear fog button. What I'm asking for is if INPA can be used to code them?

[QC_ZHP]

Pop that faceplate on you current LCM and it should already be enabled.

[derbo]

I do have a Euro Faceplate with the rear fog button. What I'm asking for is if INPA can be used to code them?

No. Not that I am aware. But if you have INPA installed, you should have NCSexpert as well.

Also rear fogs on a sedan still require coding to achieve the proper rear fog (drive side middle only.)