NIce Post, thanks for sharing
NIce Post, thanks for sharing
I'm not used to having a project thread, I've forgotten to update it!
I recoded the MK60 DSC module to M3 specs for LSD, oversteer, and gear torque control settings. WAY better! More detail here: http://www.zhpmafia.com/forums/showt...730#post452730
And I replaced my O2 sensors, the bank 2 sensor was clearly fouled, it looked aweful. Now my O2 voltages are consistent between banks.
Also, my fuel pump was getting tired and wasn't keeping up with the TS2 kit so I upgraded to the M3 fuel pump, and installed the baffle fixture while I was in there too
Last edited by rkneeshaw; 07-03-2017 at 04:38 PM.
2003 BMW 330i ZHP
ESS Twin Screw Stage 2 - Wavetrac - Headers - Borla - BMW Performance
Turner Motorsports - Powerflex - Hawk Performance
Build thread: http://www.zhpmafia.com/forums/showt...yan-s-2003-ZHP
Wheelwell: 2003 BMW 3 Series
Fuelly: 2003 BMW 330i
Awesome
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Tie rod day. Took me like 30 minutes to do both. Nice easy job. Alignment is scheduled for wednesday.
I didn't think the old tie rods were that bad, but the steering feels a lot more stable.
So this year, at about 110k, I've completed the following refresher/maintenance items:
Fuel pump
Fuel filter
Tie rods
O2 sensors
Oil filter housing gasket
Belt tensioner
FCABs
Front and rear diff bushings
Rear subframe bushings
Upper inner rear control arm bushings
Valve cover gasket
Did the RTABs, outer rear control arm bushings, vanos, and spark plugs last year.
Only thing left to do is front control arms, sways, and shocks/struts and then I'll let my bank account heal. Maybe
Last edited by rkneeshaw; 07-03-2017 at 04:41 PM.
2003 BMW 330i ZHP
ESS Twin Screw Stage 2 - Wavetrac - Headers - Borla - BMW Performance
Turner Motorsports - Powerflex - Hawk Performance
Build thread: http://www.zhpmafia.com/forums/showt...yan-s-2003-ZHP
Wheelwell: 2003 BMW 3 Series
Fuelly: 2003 BMW 330i
^nicw work. Good plan.
Thumbs, iPhone, TaT.
How's the quality of those rods?
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
2003 BMW 330i ZHP
ESS Twin Screw Stage 2 - Wavetrac - Headers - Borla - BMW Performance
Turner Motorsports - Powerflex - Hawk Performance
Build thread: http://www.zhpmafia.com/forums/showt...yan-s-2003-ZHP
Wheelwell: 2003 BMW 3 Series
Fuelly: 2003 BMW 330i
Nice.
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
2003 BMW 330i ZHP
ESS Twin Screw Stage 2 - Wavetrac - Headers - Borla - BMW Performance
Turner Motorsports - Powerflex - Hawk Performance
Build thread: http://www.zhpmafia.com/forums/showt...yan-s-2003-ZHP
Wheelwell: 2003 BMW 3 Series
Fuelly: 2003 BMW 330i