Last edited by Hornung418; 06-26-2012 at 03:18 PM.
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Sorry for the delay guys, bit tricky finding all the numbers needed and the correct super sessions with the shocks, I finished the kit and will work up getting an image for it in the next day or so.
http://www.fcpeuro.com/products/bmw-...em-33500429577
Will see if I can offer it to you guys at a special rate considering how many of you guys are interested. Also if there is anything you guys may be looking for let me know and I will see if I can add them to the site for you guys.
Wow! That's a great deal. Glad to have you aboard, FCP
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
wow, awesome! and you accept paypal :]
--Wes--
04 330i ZHP Oxford Green/Natural Brown
04 330Ci ZHP Silvergrey/Alcantara (RIP)
Those of you considering this or just a mere CAB replacement may want to know the offset CABs from the BMW Z4M fit the E46 CAB brackets.
I have a similar setup on my '87 E30 using aluminum ctrl arms and offset bushings from the E30 M3. Turn-in response is noticeably improved. Not that a ZHP is weak in that area but if only for shits n gigs, I plan to go that route next time I do E46 CABs.
^^ You way want to awaken the following thread or at least PM the OP. If you learn anything via PM, do tell:
http://www.zhpmafia.com/forums/showt...ffset-bushings!