I can't link you to the
exact ones I purchased as I don't have that seller's information anymore. This was a few years ago, so the listings dropped from my eBay list. I can, however, link you to ones from other sellers that look like the same ones.
These all come in pairs, so Qty 1 = 2 bulbs.
Note: These bulbs will most likely interfere with your FM Radio signal. When they are illuminated, they introduce static for some odd reason. If the turn signals are on, you'll hear static interrupt your FM broadcast as they blink. There is no static if you don't use the FM radio at all, and doesn't affect other radio operations.
Brake lights - Red CREE 1156 CANBUS
If you plan on only using these for brake lights, then you only need Qty 1. If you plan on using these for running lights as well, then you'll need Qty 4.
Note: I do not recommend using these as running lights (the bottom row of bulbs) because they run significantly brighter than incandescent bulbs in their "half illuminated" state and can be pretty uncomfortable for others to look at when it's dark out. In my setup, all of my bottom-row bulbs are incandescents, while the turns and brake lights are LEDs.
https://www.ebay.com/itm/Red-Canbus-...xTrlyX&vxp=mtr
Turn signals - Amber CREE 1156 CANBUS
You'll need either Qty 1 if you only want to use these in the rear, or Qty 2 if you wish to use them front and rear. I recommend doing front and rear so that you have matching pairs. Plus it looks so cool from the front.
https://www.ebay.com/itm/Canbus-1156...5TwCSZ&vxp=mtr
To top it off, you may be interested in white bulbs for the reverse lights. Qty 1 needed.
https://www.ebay.com/itm/2x-1156-750...xT229d&vxp=mtr
As far as brightness goes, these are brighter than stock incandescents, and are highly visible even during direct sunlight.
Regarding flicker, the flicker only happens periodically as the CANBUS system checks for bulb health, so they don't flicker constantly, just every few minutes. With the hot and cold bulb checks disabled, they don't flicker at all.