and for the final 2 fittings to the power unit, you need to remove the 2 threaded covers. The video shows they guy simply unscrewing them by hand, but mine were on tight. So 13mm there (the video shows that a slotted screwdriver would also work, but my caps don't have the slots for a screwdriver)Originally Posted by pedro2u
OK, assembled the 4 hose fittings (total of 6) while watching the Presidents Cup...... Good indoor coffee table project
FYI - grab a 17mm and 22mm open end wrench for this step (save you rummaging around in the toolbox....)
Indoor work is done.....
Summary - grab a 13, 17 and 22mm
Reply With Quote