What did you do for your ZHP/BMW today?

[BCS_ZHP]

Oil changes for both my domestics yesterday/today too. Found cracked motor mounts on the Denali, parts are fairly cheap but front diff has to be removed and engine has to be lifted, 9.7 hrs book time - ouch! Called the dealer to see if there might be a service bulletin/recall, my 75K mile vehicle exceeded its 5 yr/100k power train warranty 13 days ago. Due to my frequent buying history, dealer is trying to get my warranty extended by one month to cover it, otherwise oh crap.

[cakM3]

ordered the ///M deadpedal for the ZHP from ECS Tuning last night

[CERF04ZHP]

ordered the ///M deadpedal for the ZHP from ECS Tuning last night

Nice Charlie! I put mine in a few months ago... very nice accent to the interior. When you're done, you'll say to yourself, "Why didn't it come like this from the factory?

[BCS_ZHP]

Damn cold out there this morning, just a quick one, these look very nice on a TIAG car. Also added the new style center caps. And the spot under the car isn't a leak, just a leftover remnant from Horney's brake change last month.

[cakM3]

Nice Charlie! I put mine in a few months ago... very nice accent to the interior. When you're done, you'll say to yourself, "Why didn't it come like this from the factory?

Funny you mention that Channing! When I first learned that this was available for our cars, I was thinking that

Yes, I agree....this should have come with the ZHP

[zj96sc]

One of these will clean up those lug holes:

http://www.autogeek.net/lug-nut-brush.html

Soak the area with sonax and then agitate with that brush. will come squeaky clean.

[Hochspannung]

ordered the ///M deadpedal for the ZHP from ECS Tuning last night

I have one in my Msport, it was like that when i bought it earlier this month. I just assumed it was stock.

[Hochspannung]

One of these will clean up those lug holes:

http://www.autogeek.net/lug-nut-brush.html

Soak the area with sonax and then agitate with that brush. will come squeaky clean.

I took an old tooth brush, used a lighter to soften the arm near the bristles, then bent it to almost a 90 degree angle. worked perfect for the lug holes and other hard to reach places. I made several at different angles.

[BCS_ZHP]

Its my son's car, so he's going to have to be the one to get into that level of detailed cleaning.

When I reinstall my wife's 135s in the Spring, I'll take the time to clean out those lug holes before I put them on the car.

[llll1l1ll]

I had the taillight recall taken care of.