LMAO.....whatever. Now you have both. Tires and rims.
Capo di tutti capi
LMAO.....whatever. Now you have both. Tires and rims.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Big Earner
Clay baring the babe. My clay bar is turning from white to black. (Black over-spray). I'll update my over-spray thread with some pics later/tomorrow.
Hope I can get an after wash in before the weather turns cold. The wind is picking up and it's starting to sprinkle.
Messaggero
You can come clay mine when your done =)Originally Posted by Ryans323i
~Steve
Sent from my iPhone using Tapatalk
Mods: Smoked corners, smoked side markers, smoked tails, 35% tint, CF kidney grills, debadged, angel eyes, 3000k HID Fogs, OBX exhaust, Sharked, solo werks S1 coilovers, front and rear strut brace, AUX cable
"I'd rather lose by a mile because I built my own car, than win by an inch because someone built it for me"
Capo
weather does not affect me...I have use of an auto hobby shop at the base by where I work...completely enclosed and temperature controlled
@ Ryan, hope you are able to get everything off of Lucy!
Campieri
Thought this was tire related...cause he is getting new tires. Now everyone knows
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Big Earner
Done with the clay bar and the final wash. Everything came off, yay. She's a smooth as butter.
Consigliere
tried to pop in my new homelink roof switch. found what I thought was the plug, took out the panel, cut the hole, poped in the unit, went out to my car to plug it in, wasn't the right plug. found the right plug - not there, it had been clipped out. AWESOME. so its not like I can just return the part cuz I already cut my roof panel.
any suggestions?
i just need the small white male ended switch on the cars end to plug it in.
bavarian auto recycling said $45 for any harness... this is like $.56 of plastic
Call me Seth
CURRENT: 2016 Long Beach Blue BMW /// M2
RETIRED: ‘15 F22 M235i | '08 E90 M3 DCT "GoinHAM3" | '04 E46 M3 6MT "WEGOHAM"
'04 330i ZHP | '11 E82 135i | '08 E90 328xi | 07 E91 328xi SportWagon
Capo
nice to hear
Messaggero
ouch!
"Lapit mga kaibigan at makinig kayo, ako'y may dala-dalang balita galing sa bayan ko
Nais kong ipamahagi ang mga kwento at mga pangyayaring nagaganap sa lupang ipinangako..."
Messaggero
Not sure about BMW but on US made cars you can get a repair pigtail (connector with a few inches of wire that you splice into the harness) for just about any connector. I don't know if these would show up on Realoem or not. You might have to talk to a dealer with a parts man that knows his stuff. Maybe one of the guys at Tischer would know what you need. If worse comes to worse that panel for the headliner is only something like $15 IIRC.
Posting Permissions
