What did you do for your ZHP/BMW today?

[nike001]

He might. It only takes perhaps 2 minutes to put on.

So what's he going to do when the car is dirty? The car is supposed to be clean when using the cover in order for dirt to not imbed itself in the weave of the cover. When this happens, all you're doing is putting scratches in your car every time thereafter when using the cover.

I'd rather my car get dirty in the elements.

[danewilson77]

Most likely he would ONR it and put the cover on. Or he'll deal with the swirls. He obviously is willing to risk swirl introduction for cover install. I don't know of all of his reasons for wanting to put the cover on every night.....but he has the data, and doesn't need to explain his reasons to me.

[az3579]

At least in the mean time, why not code it to use the inner bowls for the high beams?

I've always coded it to be like that, but since painting the inner bowls yellow, they are useless.


Sent from my iPhone 4S from Tapatalk

[Whitexi]

I changed back to my 45's and checked the front differential fluid.

[JupiterBMW]

I deleted my headlight washers this afternoon...still need to recode my car to complete my mod

Started off with plugging the headlight washer pump output but accidently pulled the headlight washer pump out draining my washer fluid reservior...that part
Also updated my avatar this afternoon

But, why?? Do you guys not like having this option? I've never used mine, and probably never will, but I still like them...

And fwiw, removing the lights is still plenty easy with the washers in place. I will try and take a video to show this when I get home. I had my lights out in about 20 minutes (from start to both assemblies on the ground...)

[cakM3]

But, why?? Do you guys not like having this option? I've never used mine, and probably never will, but I still like them...

And fwiw, removing the lights is still plenty easy with the washers in place. I will try and take a video to show this when I get home. I had my lights out in about 20 minutes (from start to both assemblies on the ground...)

Jon, it's not a matter of my not liking headlight washers, but mostly because my passenger's side headlight assembly had way too many broken clips to where moisture was seeping inside. I was more worried of my passenger's headlight assembly causing electrical problems so I swapped it out with a perfect passenger's side headlight assembly but realized that the new part was for cars w/o cold weather package. On the new assembly, there were no mounts for the headlight washers so I had to delete my headlight washers if I wanted to swap out the passenger's side headlights. This is why I did this. I basically kept everything intact underneath so when I am able to source the "proper" part, I can opt to restore everything back to OE....but for now I will know that I can drive in the upcoming winter months not having to worry about my headlights

fwiw....I have no problems removing the headlights but find that the passenger's side is a real PITA due to lack of clearance and how tight the fit is with the hose in place....you tend to break the nozzle neck where the hose attaches to it before separating it....happened to me twice now....and that nozzle is a $60 part...

[Ryans323i]

Charlie, the front looks really clean. I really like the delete. Also like the new avatar.

Washed the exterior and detailed the interior. I'll be working on detailing the exterior this week. Gotta get her all shined up for EuroFest.

[az3579]

But, why?? Do you guys not like having this option? I've never used mine, and probably never will, but I still like them...

And fwiw, removing the lights is still plenty easy with the washers in place. I will try and take a video to show this when I get home. I had my lights out in about 20 minutes (from start to both assemblies on the ground...)

I can answer the why.
Personally, I think they're useless without wipers. The removal of the headlights really is more of a PITA because it's so easy to break stuff while removing the hoses and nozzles. I already broke one nozzle cover and ended up paying $140 or so to fix it. No more.




Sent from my iPhone 4S from Tapatalk

[terraphantm]

I've always coded it to be like that, but since painting the inner bowls yellow, they are useless.


Sent from my iPhone 4S from Tapatalk

Ah, I did not realize you painted your bowls yellow. One of the reasons I've never done so my self (other reason being I just don't like yellow )

Jon, it's not a matter of my not liking headlight washers, but mostly because my passenger's side headlight assembly had way too many broken clips to where moisture was seeping inside. I was more worried of my passenger's headlight assembly causing electrical problems so I swapped it out with a perfect passenger's side headlight assembly but realized that the new part was for cars w/o cold weather package. On the new assembly, there were no mounts for the headlight washers so I had to delete my headlight washers if I wanted to swap out the passenger's side headlights. This is why I did this. I basically kept everything intact underneath so when I am able to source the "proper" part, I can opt to restore everything back to OE....but for now I will know that I can drive in the upcoming winter months not having to worry about my headlights

fwiw....I have no problems removing the headlights but find that the passenger's side is a real PITA due to lack of clearance and how tight the fit is with the hose in place....you tend to break the nozzle neck where the hose attaches to it before separating it....happened to me twice now....and that nozzle is a $60 part...

Hmm? The washers don't attach to the headlights - they attach to the brackets underneath the headlights. As far as I'm aware, they all accept washers (even if they didn't, you could easily reuse the old bracket).

[az3579]

Ah, I did not realize you painted your bowls yellow. One of the reasons I've never done so my self (other reason being I just don't like yellow )

Yeah, when I painted them is when I had the projectors put in so little did I know that the highbeams would be screwed up. Oh well. Otherwise the bi-Xenon highs would have been more than sufficient.





Sent from my iPhone 4S from Tapatalk