What did you do for your ZHP/BMW today?

[static667]

Lets see...
I changed out my VANOS unit, put on a new VCG, installed an M3 timing chain tensioner, changed out my oil filter housing, put red loc-tite on my oil pump nut, put on a new oil pan gasket, installed a new water pump, thermostat, coolant pipes, PCV valve, spark plugs, clutch, front and rear shaft seals, exhaust manifold studs, exhaust manifold gaskets, new exhaust manifold nuts, and intake manifold gasket. In other words, prepared an engine for install. Tomorrow, it will be in the car.

[danewilson77]

Lets see...
I changed out my VANOS unit, put on a new VCG, installed an M3 timing chain tensioner, changed out my oil filter housing, put red loc-tite on my oil pump nut, put on a new oil pan gasket, installed a new water pump, thermostat, coolant pipes, PCV valve, spark plugs, clutch, front and rear shaft seals, exhaust manifold studs, exhaust manifold gaskets, new exhaust manifold nuts, and intake manifold gasket. In other words, prepared an engine for install. Tomorrow, it will be in the car.

Awesome news Kyle. So... I guess the fourth engine that you got was SAT.

Sent from Williamsburg, VA USA

[johnrando]

Really good to hear Kyle. Hope it continues to go well.

[328ioc]

Thanks. Nj has the law too. Hopefully the 50 is light enough. 35 is pretty obvious.


Sent from the freaking Catalina wine mixer.

I have friends who have had 35 and never got bothered. I also have 35 but I've never had this car in Jersey so we will see how the next few days goes.

But your 50 looks great.

Sent from my DROID RAZR using Tapatalk 2

[Hermes]

say goodbye everybody... new M10 will be picked up next week for full rebuild on an engine stand + mods before putting in the 02 (292 grind, dual side drafts, other stuff...)



edit: I gotta start working on the 911...

[Hornung418]

Great news, Kyle!!! So excited to see everything in action.

JP, all of that work on the M10 and you're just gonna chuck it for a new one? And put that battery in the trunk, son!

[kayger12]

Lets see...
I changed out my VANOS unit, put on a new VCG, installed an M3 timing chain tensioner, changed out my oil filter housing, put red loc-tite on my oil pump nut, put on a new oil pan gasket, installed a new water pump, thermostat, coolant pipes, PCV valve, spark plugs, clutch, front and rear shaft seals, exhaust manifold studs, exhaust manifold gaskets, new exhaust manifold nuts, and intake manifold gasket. In other words, prepared an engine for install. Tomorrow, it will be in the car.

Outstanding!!

[zhpnsnv]

been jonesing really hard for another 135i the last two days... not sure how much longer I can hold out.

Well, let me know and we can chat about getting @ or below invoice pricing! (if you're shopping new).

[zhpnsnv]

Looks darker in overcast conditions.




Sent from the freaking Catalina wine mixer.

[Johal E32]

^sold! 50% tint all over for the E39!

Thank you for that picture!