Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 173 of 2635 FirstFirst ... 731231631711721731741751832232736731173 ... LastLast
Results 1,721 to 1,730 of 26346
  1. #1721
    Join Date
    Jan 1970
    Location
    32.8 N, 117.3 W
    Posts
    7,640
    both are possible with a B38, case in point:




  2. #1722
    Join Date
    Mar 2011
    Location
    Philadelphia
    Posts
    1,079
    Well... My car has an exhaust leak somewhere. Last week I was lifting it to check it out, and then my jack slipped while raising the front. Front subframe bent near the steering rack mount, reinforcement plate bent, and the splash shield cracked. I've also since discovered that my driver-side control arm is shot, and my lower radiator hose is leaking (very slowly albeit).

    The bend in the subframe is barely noticeable... but it's a structural piece, and used subframes are pretty cheap on eBay. I got a near mint one for $125 shipped. So the car is getting new control arms and bushings, a ZHP steering rack, new coolant and hoses, and new underbody panels. It already has new motor mounts so I'm not replacing those. May end up replacing my cats -- I think it's just a bad gasket or loose bolt, but it is possible that the pipes got damaged somehow.

    Car probably won't be operational 'til next week since I don't have the control arms yet. I don't really feel like putting it back together with known bad arms.

  3. #1723
    Join Date
    Jan 1970
    Location
    32.8 N, 117.3 W
    Posts
    7,640
    ouch... I feel for you big time

  4. #1724
    Sorry to hear that terra...

    Sent from my DROID RAZR MAXX HD using Tapatalk 2

  5. #1725
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,982
    Quote Originally Posted by terraphantm View Post
    Well... My car has an exhaust leak somewhere. Last week I was lifting it to check it out, and then my jack slipped while raising the front. Front subframe bent near the steering rack mount, reinforcement plate bent, and the splash shield cracked. I've also since discovered that my driver-side control arm is shot, and my lower radiator hose is leaking (very slowly albeit).

    The bend in the subframe is barely noticeable... but it's a structural piece, and used subframes are pretty cheap on eBay. I got a near mint one for $125 shipped. So the car is getting new control arms and bushings, a ZHP steering rack, new coolant and hoses, and new underbody panels. It already has new motor mounts so I'm not replacing those. May end up replacing my cats -- I think it's just a bad gasket or loose bolt, but it is possible that the pipes got damaged somehow.

    Car probably won't be operational 'til next week since I don't have the control arms yet. I don't really feel like putting it back together with known bad arms.
    Sucks Terra. One more opportunity to become intimate with your car though.
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  6. #1726
    Join Date
    Jan 1970
    Location
    Maine-Vacationland
    Posts
    1,961
    Damn terra, that's too bad good luck with the repairs!


    Sent from my iPhone 5.

  7. #1727
    Join Date
    Jan 1970
    Location
    NJ
    Posts
    2,003
    Sunny drive down the parkway. Tomorrow I'll wash.
    - Marc

  8. #1728
    Join Date
    Apr 2011
    Location
    Bay Area, Cali
    Posts
    1,529
    Quote Originally Posted by Hermes View Post
    both are possible with a B38, case in point:




  9. #1729
    Join Date
    Jan 1970
    Location
    Ocean County, NJ
    Posts
    7,277
    Quote Originally Posted by zhpnsnv View Post
    Sunny drive down the parkway. Tomorrow I'll wash.
    Beautiful day for it.

    I'm tackling my vanos today. Been sitting on the parts forever.

    I'm about 2 hours in. Grabbing a quick lunch break.

    Anti rattle rings are installed and vanos pistons are reassembled.

    Just have to do the seals and button her up.

    Oh yeah, and run down the PS fluid leak that I discovered this morning....
    -Be yourself; everyone else is already taken.
    ZHP Pre-Ride Briefing

    2005 ZHP, Alcantara, Silver Cube, Nav, Sharked, BMW Perf Intake, BMW Perf CF Strut Brace, CF Valve/Fuel Rail Covers,
    Shadowline Grills, CF Splitters, Fog Light Inserts, Euro-mirrors, CDV Delete, Beisan vanos, GAS DISA, BP Coded

  10. #1730
    Join Date
    Jan 1970
    Location
    NJ
    Posts
    2,003
    Quote Originally Posted by kayger12 View Post
    Beautiful day for it.

    I'm tackling my vanos today. Been sitting on the parts forever.

    I'm about 2 hours in. Grabbing a quick lunch break.

    Anti rattle rings are installed and vanos pistons are reassembled.

    Just have to do the seals and button her up.

    Oh yeah, and run down the PS fluid leak that I discovered this morning....
    Damn, wish I saw this sooner. I'd have swung down farther to give a hand. But now I'm in my office working

    Good luck!
    - Marc

Page 173 of 2635 FirstFirst ... 731231631711721731741751832232736731173 ... LastLast

Similar Threads

  1. Mini Meet and Shoot
    By M0nk3y in forum Everything Non ZHP (the place for non-ZHP photos)
    Replies: 11
    Last Post: 06-30-2011, 08:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •