Whoa!! ^^
Enforcer
Whoa!! ^^
Slicktop AW 6spd Naturbraun
Messaggero
Lol. No lie, it was 60+degrees on Sunday. Snow on Tuesday and no sign of stopping until tomorrow morning. It should give the ZHP a few days to rest its legs.
Messaggero
This started my 6 hour drive home...
Matt/Matthew/Belvin
2003 ZHP Sedan, 6sp, Jet Black/Sand with Black Cube
*Amber Army*
Soldier
>kayger12, where did you source your CF splitters? I see several online and the prices vary. Please let me know. Chris
Boss
Picked them up from Bimmian http://www.bimmian.com/AutoCarbon-Ca...W-E46-3-Series.Originally Posted by ChrisCSL#25
Fitment was much better than the ones I had gotten from a Khoalty a few years back.
-Be yourself; everyone else is already taken.
ZHP Pre-Ride Briefing
2005 ZHP, Alcantara, Silver Cube, Nav, Sharked, BMW Perf Intake, BMW Perf CF Strut Brace, CF Valve/Fuel Rail Covers,
Shadowline Grills, CF Splitters, Fog Light Inserts, Euro-mirrors, CDV Delete, Beisan vanos, GAS DISA, BP Coded
Messaggero
yeah that's the one
hmm that's weird. the last time i bought it, it looks like the one on the left lol hmm i have a spare headlight. i'll try ordering a seal and see if it's the same and report back.Yup. It's the seals. Mine do the same thing. I bought new seals from the dealer and the problem is they are very different from the seals that are on the car now.
Old: rubber like material. Seems hollow and thin
New: more like a thick rubber or foam material. A lot thicker than the old seal.
Problem is, I pushed and pushed and pushed and the seal was too thick compared to the old seal. It just didn't want to go on. I have a picture comparing the two I can try to find.
If anyone knows a trick it would be much appreciated.
Messaggero
Please do. I really want to change these things. Do you have the part number that you have handy?
63128380210 was mentioned. Go look that part number up on ECStuning. There is a picture. It looks like the thick foam one on the right hand side of my picture. NOT easy to install, if possible at all.
63128362446 is for the E39 but it looks more like the original gasket that came with our cars. I wonder if it would fit....
2005 BMW 330i ZHP 6MT. Built 11-19-04. Bought 4-2012.
Stock: Nav, leather, PDC, Xenon
Added by me: OEM Alarm, OEM heated seats, OEM aux kit, OEM Bluetooth, intravee, M3 strut brace, BMW Performance Intake, Nappa leather arm rest, updated LCM (triple blink, euro hazards, trifecta lighting, 3 stage brakes), temp gauge
Soldier
>kayger12, thank you very much! I saw those and liked them best. Thanks for the info!
Boss
Very welcome.
Sent from my Nexus 7 using Tapatalk
-Be yourself; everyone else is already taken.
ZHP Pre-Ride Briefing
2005 ZHP, Alcantara, Silver Cube, Nav, Sharked, BMW Perf Intake, BMW Perf CF Strut Brace, CF Valve/Fuel Rail Covers,
Shadowline Grills, CF Splitters, Fog Light Inserts, Euro-mirrors, CDV Delete, Beisan vanos, GAS DISA, BP Coded
Capo di tutti capi
This is all that matters after day one of the move in.
Sent from my SCH-I545 using Tapatalk
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Posting Permissions
Reply With Quote
