What did you do for your ZHP/ BMW / MINI today? #2

[Lanister]

Someone is taking it a bit too seriously

[johnrando]

WTF!!!!?????? Anthracite birch! I've been looking for that forever. PM'ed! (You're brother's looks a little iffy though, I'd like mine polished like yours is).

@ JP Nice work.

@ Marcus, not a bad trade up!

[ken]

I may be a bit anal.

Today I cleaned out the garage with the leaf blower (ZHP parked down the street), then vacuumed all the dirt in the grooves of the concrete in the garage so my new ZHP won't get any dust or sit on any dirt at night. Then I pressure washed the drive way including any dirt and gunk in all the grooves so my ZHP doesn't need to drive over that crap to get to the garage.

Tomorrow I get to clean my wife's Tahoe so my ZHP doesn't have to look at the disgrace that it is... finger prints on every surface, treating it like a mobile coat closet. Despicable.

Sent from my LG-VS980 using Tapatalk

[Avetiso]

at the Tahoe comment. Hilarious.

Sent from my SM-N900T using Tapatalk

[JupiterBMW]

I may be a bit anal.

Today I cleaned out the garage with the leaf blower (ZHP parked down the street), then vacuumed all the dirt in the grooves of the concrete in the garage so my new ZHP won't get any dust or sit on any dirt at night. Then I pressure washed the drive way including any dirt and gunk in all the grooves so my ZHP doesn't need to drive over that crap to get to the garage.

Tomorrow I get to clean my wife's Tahoe so my ZHP doesn't have to look at the disgrace that it is... finger prints on every surface, treating it like a mobile coat closet. Despicable.

Sent from my LG-VS980 using Tapatalk

When you take it a step further and high gloss epoxy coat the floor and paint the garage walls alpine white to match, give me a call. nice werk!


iPhone 5S. Tapatalk Pro. BOOM

[JupiterBMW]

Car is on jack stands, all wheels off, disassembly has begun. The project?? Brakes...

I ordered a full Turner Motorsport package recently...

StopTech Cross Drilled rotors
StopTech SS lines
StopTech street performance pads
New sensors
ATE Type 200 fluid
new front calipers
TMS brass caliper guide bushings

I will also be painting the calipers black to give them a clean look. Along with this, I'll be pulling the rear fenders a bit so that I can squeeze the 10mm spacers back there. And then a full detail and Leatherique treatment...

All this before I head to Sebring on Thursday...

[gmurphy]

Car is on jack stands, all wheels off, disassembly has begun. The project?? Brakes...

I ordered a full Turner Motorsport package recently...

StopTech Cross Drilled rotors
StopTech SS lines
StopTech street performance pads
New sensors
ATE Type 200 fluid
new front calipers
TMS brass caliper guide bushings

I will also be painting the calipers black to give them a clean look. Along with this, I'll be pulling the rear fenders a bit so that I can squeeze the 10mm spacers back there. And then a full detail and Leatherique treatment...

All this before I head to Sebring on Thursday...

Fantastic work. Stop by my house my car is waiting just kidding.


Sent from my iPhone using Tapatalk

[JupiterBMW]

Fantastic work. Stop by my house my car is waiting just kidding.


Sent from my iPhone using Tapatalk

I would but I forgot I have to change the oil too...


iPhone 5S. Tapatalk Pro. BOOM

[gmurphy]

I would but I forgot I have to change the oil too...


iPhone 5S. Tapatalk Pro. BOOM

Darn it


Sent from my iPhone using Tapatalk

[Hermes]

Put the aFe on the red car for now