I have a question about tensioners. I know that people sometimes convert the alternator tensioner from mechanical to hydralic, but does/can the A/C tension be converted to hydralic as well?
I have a question about tensioners. I know that people sometimes convert the alternator tensioner from mechanical to hydralic, but does/can the A/C tension be converted to hydralic as well?
2005 BMW 330i ZHP 6MT. Built 11-19-04. Bought 4-2012.
Stock: Nav, leather, PDC, Xenon
Added by me: OEM Alarm, OEM heated seats, OEM aux kit, OEM Bluetooth, intravee, M3 strut brace, BMW Performance Intake, Nappa leather arm rest, updated LCM (triple blink, euro hazards, trifecta lighting, 3 stage brakes), temp gauge
The A/C tensioner is always going to be a mechanical unit.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Thank you for your response. After watching a video on youtube where a guy changed from mechanical to hydraulic, I better understand the assembly and will be ordering a new hydraulic component as well. It kind of makes sense since I'll have it all apart and be in there, it won't take an extra 5 minutes to install.
- 2021 Tesla Model Y LR-AWD '21-
- 2014 CPO i01 BEV Capparis White Tera World, '17-'20
- 2015 CPO i01 BEV Laurel Grey Tera World, '17-'18 R.I.P
- 2015 i01 REx Laurel Grey Tera World, '15-'17
- 2003 CPO 330i ZHP Imola Red Build 03/03/03, '06-'15
Gave her a facelift with Euro Clear-corners and side markers.
Went to my buddys shop during lunch to check out my suspension.
Looks like my FCAB'S are worn.
Going to order a set of Z4M's to go with my new Coil Overs.
Sent from my SCH-I545 using Tapatalk
2005 IR ZHP Alcantara 6MT l Bimmian phone mount l Khoalty Angel Eye's l Khoalty Fog's l AFE Stage 1 Intake l AFE Dynamic Air Scoop's l CDV Delete
Besian Sealed VANOS l Flat black Kidney Grills l Magnaflow Cat-Back
Good plan. You might need an alignment after you install them, but they're well worth it
--edit--
Oh you're redoing the suspension. Probably already had an alignment planned?
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
2005 IR ZHP Alcantara 6MT l Bimmian phone mount l Khoalty Angel Eye's l Khoalty Fog's l AFE Stage 1 Intake l AFE Dynamic Air Scoop's l CDV Delete
Besian Sealed VANOS l Flat black Kidney Grills l Magnaflow Cat-Back