Originally Posted by cakM3
I took out the Beltronics STi Driver hard wire installed in my ZHP for the Valentine hard wire. As much as I love my STi Driver, I prefer everything that the V1 has even more
V1....Still No. 1 on my list.
Messaggero
I took out the Beltronics STi Driver hard wire installed in my ZHP for the Valentine hard wire. As much as I love my STi Driver, I prefer everything that the V1 has even more
V1....Still No. 1 on my list.
Lawrence
"But Mama....That's where the fun is!"
BMW CCA #192742
San Diego & Sin City Chapter
NRA Lifetime Member
STABLE
'90 M3 AWII - Garage Queen (The Crown Jewel)
'20 X5 M Sport Tourquis Blue - #3 Son Ride
'23 X5 M Sport Sapphire Black - #1 Son Ride
'23 X5 M Sport Mineral White - Daughter & Grand Kids Ride
'24 X4 M40i Brooklyn Grey - SO's New Ride
'05 330i ZHP Mystic Blue Metallic 6 spd - My Ride
'03 Nissan Frontier XE Crew Cab - Hauler & Down Range vehicle
Enforcer
Replaced the clips on my moonroof sliding shade, lubed up the tracks, and FINALLY have a properly-working shade. That was so easy, I'm not sure why I didn't do it 2-1/2 years ago...
Enforcer
Also, looked at KW replacement parts and their pricey but gorgeous hydraulic lift systems.:
Campieri
More BBS parts for the 82
Capo
I actually did this Friday but haven't had time to post it until now...
Installed a tri-stitch alcantara wheel in my ZHP, as well as mounted the BBS CH wheels. My gawd this car is so much sexier now.
I used GooGone which worked like a charm, but dealing with the sticky shit afterwards is the biggest PITA. My hands were black for two days.
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Campieri
I noticed your wheels... Forgot to compliment you on them with everything going on yesterday
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Capo
What DIY did you use to do this? The sun shade on my ///M is broke and needs the clips replaced. I have all the clips to do this. If its as easy as you say then I will be doing this over the upcoming weekend
Messaggero
http://forums.bimmerforums.com/forum...roof-Final-FixWhat DIY did you use to do this? The sun shade on my ///M is broke and needs the clips replaced. I have all the clips to do this. If its as easy as you say then I will be doing this over the upcoming weekend
Super easy DIY, it will be very helpful to have a friend to hold the glass for you though so you can properly re-align it with the roof when you're done.
Capo
This
New tool box
Got lots of shelving and a tool box to organize my garage
Enforcer
I got euro bind spot mirrors but my dad ordered the Unheated pair and I need the heated ones . So now I have to send those back
Posting Permissions
Reply With Quote
