Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 4 of 9 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 84
  1. #31
    Join Date
    Feb 2013
    Location
    Austin TX
    Posts
    7,993
    Welcome, sir. Good looking car.

  2. #32
    Those A pillars were actually repaired...or I attempted to. I reglued the felt, stretched it and let it dry before reinstalling. Was great for a couple months, then started to loosen again. Not sure what I did wrong, but I'd honestly just buy replacements...don't think it's going to be a permanent fix at this point.

  3. #33
    Notes below

    Quote Originally Posted by mindspin311 View Post
    Quick to-do list I just came up with. Things I need to look in to or check.

    1. Transmission fluid, plugs Transmission fluid is original, probably due.
    2. Rear diff fluid, plugs Same as above
    3. Rear diff mounts These are original, though I never noticed any reason to replace them.
    4. Transmission mounts (?) Original, but again no reason to replace, IMO
    5. Engine mounts (?) I replaced these with the M3 versions when I had the oil pan gasket redone.
    6. Tint
    7. Sun visors (wont stay "up" when fully extended towards the windshield) One of my biggest complaints too.
    8. Center console plastics
    9. Rear leather dent (something was in the back seat and it caused an impression that hasnt gone away) Sorry...car seat. Throw some leatherique at it, soak it in the hot sun for a day, should soften up.
    10. Oil filter housing gasket Relatively easy DIY. Don't pay a shop 600+ dollars to do it.
    11. Passenger front window regulator Again, do it as a DIY. Save some money.
    12. Headunit firmware Eonon releases updates, though I flashed the most recent version earlier this year.
    13. Alignment Just done, spot on.
    14. Auto-dimming mirror
    15. Auto-unlock
    16. S/W 4.0+ LCM, Triple blink
    17. B-pillar trim
    18. Black kidney grills
    19. Yellow tint foglights
    20. Paint exhaust tips
    21. E-brake adjustment I adjusted the rear shoes, they are new, just tighten the nuts at the handle more.

  4. #34
    Join Date
    May 2014
    Location
    Sandy Springs, GA
    Posts
    133
    Quote Originally Posted by scooby24 View Post
    Notes below
    Thanks for the info Greg!
    2004 Sedan | Imola | Black Leather | Black Cube

  5. #35
    Join Date
    May 2014
    Location
    Sandy Springs, GA
    Posts
    133
    Welp, honeymoon period is over. Car currently doesnt want to start. Possibly a starter? Got all my dash lights and headlights are strong, per OBC, battery voltage is 12.2-12.3v. No click or anything from the starter.

    Going to check voltage going to the starter today or tomorrow and see where that leads me.
    2004 Sedan | Imola | Black Leather | Black Cube

  6. #36
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,981
    Nice looking car. Love the way it sits.

  7. #37
    Join Date
    Feb 2014
    Location
    Alexandria, VA
    Posts
    2,805
    Quote Originally Posted by mindspin311 View Post
    Welp, honeymoon period is over. Car currently doesnt want to start. Possibly a starter? Got all my dash lights and headlights are strong, per OBC, battery voltage is 12.2-12.3v. No click or anything from the starter.

    Going to check voltage going to the starter today or tomorrow and see where that leads me.
    What did you find out?

    Sent from my HTC6500LVW using Tapatalk

    Current:
    1988 BMW 325is
    1996 Toyota Land Cruiser FZJ80 x3 Locked - Restoration/Project Thread on ih8mud.com
    Sold:
    "Scarlett" the 2005 BMW 330i ZHP 6MT - Project/Maintenance Thread
    2011 BMW M3 E92 6MT - Info/Maintenance Thread

  8. #38
    Join Date
    May 2014
    Location
    Sandy Springs, GA
    Posts
    133
    Wasn't able to do anything yesterday due to weather. Hopefully things will be clear after work tonight.

    Sent from my Nexus 5
    2004 Sedan | Imola | Black Leather | Black Cube

  9. #39
    Join Date
    May 2014
    Location
    Sandy Springs, GA
    Posts
    133
    So, I dont think it's the starter after all...

    Thursday I tried to start it with no luck.

    Friday, rain, no progress.

    This morning I went to Harbor Freight and picked up a cheap multimeter. Grabbed everything I needed to yank the airbox to get to the starter and went out to the car. For S&G's I tried to start the car and it fired right up. Ok.... so I take it for a drive, everything is fine. Get back home, shut it down, start it up again. Hmm.... so I let it sit for a few hours... go out to start it again with my "main" key and no luck again. So I grab my 2nd key, fires right up again.

    So, with that, Im thinking it has to be EWS related. Both keys have starting issues. So something in and around the steering column.
    2004 Sedan | Imola | Black Leather | Black Cube

  10. #40
    Curse you!!! I wanted this car so bad.

    Guy still had it up on CL when I started looking, but you had beat me to it by just a few days.
    2004 330i | ZHP | 6-Spd | Imola

Page 4 of 9 FirstFirst ... 23456 ... LastLast

Similar Threads

  1. Figured I should introduce myself
    By TGM ZHP in forum New Members (or older members who have not introduced themselves)
    Replies: 24
    Last Post: 04-11-2013, 10:28 AM
  2. Allow myself to introduce... myself
    By omegaman in forum New Members (or older members who have not introduced themselves)
    Replies: 30
    Last Post: 11-18-2012, 11:08 AM
  3. Just to Introduce Myself...
    By Frankavelli in forum New Members (or older members who have not introduced themselves)
    Replies: 46
    Last Post: 10-05-2011, 06:01 AM
  4. I Thought I Should Introduce Myself
    By Gordo_GT in forum New Members (or older members who have not introduced themselves)
    Replies: 13
    Last Post: 09-21-2011, 11:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •