Test drove an M235i 6MT today with my friend who is thinking about one...not going to lie it felt very similar to a certain legendary model...got back in my zhp afterwards and still felt it's tough to beat.
![]()
Current:
1988 BMW 325is
1996 Toyota Land Cruiser FZJ80 x3 Locked - Restoration/Project Thread on ih8mud.com
Sold:
"Scarlett" the 2005 BMW 330i ZHP 6MT - Project/Maintenance Thread
2011 BMW M3 E92 6MT - Info/Maintenance Thread
sorry man, that is a not filthy...
THIS is filthy. and, not sure if you can see it or not, but this is also my truck.there are five 8' long 1x4 pine trim boards, and six 8' long 1x4 MDF trim boards in spanning the passenger seat (protected with towel), backseat (folded down) and trunk.
unfortunately, due to chronic cold temps it's just not feasible to wash the car - it would just freeze right away. i hate seeing it like this, but that's life in the salt belt.
peter
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
2012 128i M Sport
Yuck
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
What better way to spend my first day back behind the wheel
Sent from in the bushes
My 7 year itch.
Mods: BimmerBrakes Headers, Magnaflow full system, BYS Cross Drilled and Slotted Rotors, Hawk HPS Pads, Racing Dynamics Intake, Dinan Throttle Body, Bavarian Auto Short Shifter, ECS Tuning Strut Bar, Projector Fogs, Blackout Grilles, Euro Smoked Tail Lights, Black Corner Lights.
Upcoming: Coil Overs, Sway Bars, Polyurethane Bushings all around, M3 motor mounts.
That's great. Looks like the carwash was packed. I tried going on Friday at noon, but decided to wait for a better day.
A buddy and I swung by the junkyard today to see if they had parts for his S12. Needless to say, we ended up falling in with a good crowd
![]()
AFE stage 1 CAI, Silicone Stett Intake Boots, AA Headers and Exhaust, AA Tune, Cat Delete, Hicon GT Adjustable Coilovers, Quaife Helical LSD, EVO 3 SS Kit, UUC Organic Clutch w/ UUC LW Flywheel, GTR rep carbon fiber hood, CSL rep carbon fiber trunk, CDV delete, CP Forged Pistons & SP Forged Con Rods, MotoZ projector headlights, Sony bluetooth/touch nav, & lots of love
-Ben
My 7 year itch.
Mods: BimmerBrakes Headers, Magnaflow full system, BYS Cross Drilled and Slotted Rotors, Hawk HPS Pads, Racing Dynamics Intake, Dinan Throttle Body, Bavarian Auto Short Shifter, ECS Tuning Strut Bar, Projector Fogs, Blackout Grilles, Euro Smoked Tail Lights, Black Corner Lights.
Upcoming: Coil Overs, Sway Bars, Polyurethane Bushings all around, M3 motor mounts.