Installed the Ultragauge today! Haven't driven with it yet but first impressions are good.
Installed the Ultragauge today! Haven't driven with it yet but first impressions are good.
18x9 ET 42 Apex EC-7's / BC Racing BR Type Coilovers / GruppeM Intake
ECS SS Brake Lines / Coby Wheel Wrap w/ Tri-Stitch / 35% Tint / BavSound Stage 1 / Stett Intake Boots / OE Euro Clears
UPS showed up early today with the package from ECS and an early out from work. Got the parking bakes changed out, new Hawk 5.0 pads and new Brembo rotors all in the rear, with time to spare before my Son and his girlfriend arrived frorm Northern Ohio.
Sent from my iPhone using Tapatalk
Dinan; Hign Flow Intake System, & Strut Tower Brace
Turner Motorsports; Underdrive Power Pulleys
Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
Stewart High Performance Water Pump
Hawk High Performance Street 5.0 Brake Pads
Brembo Rotor
The purposeful face of a formidable athlete:
The spine-tingling 330i Performance Package.
Purchased CPO on 12/23/2006 with 28,090 miles
cleaned all leather and plastic surfaces (especially rear seat that keeps getting milk sprayed on it...PITA getting it out of the perforated leather), removed and cleaned the rubber floor mats, vacuumed extensively, cleaned rear cargo cover and the cargo tray, vacuumed that area and cleaned inside of the windows on the X5...nice to have carpet and carpet floor mats exposed again.
The all-weather rubber floor mats from BMW did a great job of keeping the winter crud off the carpets
- Stuart
/_________\
OO=[][]=OO
Current:
1988 BMW 325is
1996 Toyota Land Cruiser FZJ80 x3 Locked - Restoration/Project Thread on ih8mud.com
Sold:
"Scarlett" the 2005 BMW 330i ZHP 6MT - Project/Maintenance Thread
2011 BMW M3 E92 6MT - Info/Maintenance Thread
Current:
1988 BMW 325is
1996 Toyota Land Cruiser FZJ80 x3 Locked - Restoration/Project Thread on ih8mud.com
Sold:
"Scarlett" the 2005 BMW 330i ZHP 6MT - Project/Maintenance Thread
2011 BMW M3 E92 6MT - Info/Maintenance Thread
Tonight's progress on 02 - rear valance smoothed. No more cutout for stock exhaust or the pre stamped area for the earlier exhaust. Also welded up two little drilled holes (odd) and added the hole for the wiring to come out behind bumper for the euro tag lights that are in bumper. I am deleting the U.S. Spec tag/bracket/lights on the rear panel. I will remove the tag tomorrow. Weld up any holes associated with that assembly. Then rear is done with welding.
![]()
- Stuart
/_________\
OO=[][]=OO
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim