Messaggero
- Stuart
/_________\
OO=[][]=OO
Big Earner
Wow. The color looks great. Car is going to be amazing when finished.
Capo di tutti capi
Looks great Stu.
Sent from my SM-G925V using Tapatalk
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Consigliere
Put 501 miles on her today. Flawless execution
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Big Earner
That color should be called delicious red. Wow!Originally Posted by 330i ZHP
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Messaggero
Wow.
-Jeff | '19 JGC WK2
Sold: '03 ZHP
"There is a straight six engine at the front, a manual gear box in the middle, and drive goes to the back. That's page one, chapter one from the petrolsexual handbook." - Jeremy Clarkson
Campieri
That is an awesome color!
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Messaggero
Quick question: When replacing the expansion tank and sensor, do you remove the rubber surrounding the sensor material? The new one has it. The old one did not and it appears to be very hard to come off.
My thought is no.
-Jeff | '19 JGC WK2
Sold: '03 ZHP
"There is a straight six engine at the front, a manual gear box in the middle, and drive goes to the back. That's page one, chapter one from the petrolsexual handbook." - Jeremy Clarkson
Capo
Does it matter, since you're replacing both the expansion tank and the sensor? What I recall from when I replaced those parts as a part of my cooling system overhaul, the rubber o-ring came out with the old sensor.
Messaggero
Here's a pic:
-Jeff | '19 JGC WK2
Sold: '03 ZHP
"There is a straight six engine at the front, a manual gear box in the middle, and drive goes to the back. That's page one, chapter one from the petrolsexual handbook." - Jeremy Clarkson
Posting Permissions
Reply With Quote
