What did you do for your ZHP/ BMW / MINI today? #2

[UdubBadger]

Washed it but no pix

#ifail


GoingHAM mobile

[BMWCurves]

Washed it but no pix

#ifail

If you wash your car and there aren't any pics, did the washing even occur?

Bunch of things over the last week: new battery, replaced brake pads and rotors, applied Bimmian ///M colored stickers to the grille, painted the lower grille semi-gloss black, fixed the derailed sunshade, and coded off the auto-lock feature and ambient temperature warning at 37F. Details here.

EDIT: @terraphantm, I look forward to your guide on all of that!

[Dr Dynamite]

I do wonder if they were original. Mine only made it to 164k, though to be fair, they have seen a fair amount of track and autocross usage, as well as the 30k or so I drive a year, so it's no wonder they went out so soon.

I got the same E46 M3 mounts. It was just enough of a change to make it feel like my E30 did when at idle, like there was actually some kind of a life force up front instead of it being totally numb. I really like it even to this day.

The m3 mounts made a huge difference, the car is my daily driver but I bet tracking the car would be lots of fun. I drive about 30k miles a year too. Next are m3 tranny mounts

Sent from my SM-G925V using Tapatalk

[UdubBadger]

If you wash your car and there aren't any pics, did the washing even occur?

Bunch of things over the last week: new battery, replaced brake pads and rotors, applied Bimmian ///M colored stickers to the grille, painted the lower grille semi-gloss black, fixed the derailed sunshade, and coded off the auto-lock feature and ambient temperature warning at 37F. Details here.

EDIT: @terraphantm, I look forward to your guide on all of that!

Everyone at work noticed so yes.... It in fact did


GoingHAM mobile

[stephenkirsh]

My trans and motor mounts were completely separated at 130k. Driveline was basically flopping around.

Keep that in mind when you think your roads in your area are bad... Lol

[BADCLOWN]

PM sent to terra

[jakksfor20]

Finished brake job on the 323 and put on the PSS10's I picked up from e46f a few weeks ago. Setting on 2 is a little more firm than the PSS I had on before which are now going on the wife's ZHP. Setting on 10 is not as harsh as I was expecting.


Sent from my iPhone using Tapatalk

[alexandre]

The m3 mounts made a huge difference, the car is my daily driver but I bet tracking the car would be lots of fun. I drive about 30k miles a year too. Next are m3 tranny mounts

Sent from my SM-G925V using Tapatalk

I'm installing M3 engine and tranny mounts next weekend! Can't wait to see the difference.

Today I installed a passenger seat mat sensor bypass. Quick installation and seems to work great. Glad to clear out the christmas tree on my dash.

[330i ZHP]

A little progress on the 2002 today:

Installed cam gear locks
Finished making the faceplate to hold the stereo and gauges in the center console
Installed the idle control valve and hoses
Powder coated the oil filter housing
Powder coated a few brackets
Performed a test fit of the m3 upper section of the oil pan in the front subframe.

[UdubBadger]

If you wash your car and there aren't any pics, did the washing even occur?

Bunch of things over the last week: new battery, replaced brake pads and rotors, applied Bimmian ///M colored stickers to the grille, painted the lower grille semi-gloss black, fixed the derailed sunshade, and coded off the auto-lock feature and ambient temperature warning at 37F. Details here.

EDIT: @terraphantm, I look forward to your guide on all of that!

Still clean


GoingHAM mobile