You're up late, no work tomorrow?
Big Earner
You're up late, no work tomorrow?
Bruce
21 GMC Sierra - mine
16 X5 M-Sport - wife
11 M3 - 1st son
04 Tundra - 2nd son
17 X1 M-Sport - daughter
Former (mo/yr sold):
15 335xi M-Sport (8/18)
11 335is (8/17)
11 X5 AW/blk (11/15)
04 330xi blk/gray (7/15)
06 ZHP SGM/blk (6/15)
08 335xi blue/blk (4/15)
04 ZHPci MB/blk (2/14)
04 ZHPcic IR/Alc (10/13)
01 540iT anthra/blk (7/13)
04 ZHPci TIAG/blk (9/12)
03 540i M-Sport (9/12)
01 325ci (3/12)
02 325iT 5MT (10/11)
05 ZHPci (7/11)
03 330cic (2/11)
00 323ci (10/10)
Capo
Lol. Unfortunately I do. Headed to bed now... GNOriginally Posted by BCS_ZHP
---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - an e46f member
Consigliere
Got you. Well them improvise. 😆
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Consigliere
Lol. I got a good laugh
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Campieri
yep, that should work, too!
if you run out of room, you could use a big (~36mm) socket on the front side and pull it out.
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
2012 128i M Sport
Campieri
Every car I've done an LSD swap on has needed the rear diff bushing. I'd definitely plan on doing it.
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Campieri
Good job Shawn. I need to get me that tool🏻
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Big Earner
Well...mine didn't exactly need it...but if we had the tools it could have been done for sure. I had bought the damn bushings afterall...
Current:
1988 BMW 325is
1996 Toyota Land Cruiser FZJ80 x3 Locked - Restoration/Project Thread on ih8mud.com
Sold:
"Scarlett" the 2005 BMW 330i ZHP 6MT - Project/Maintenance Thread
2011 BMW M3 E92 6MT - Info/Maintenance Thread
Campieri
wait til 100k and then drop the subframe too and replace those mounts with AKG poly.
peter
2004 330i ZHP
2005 330iT ZHP
2010 328iT M Sport
2012 128i M Sport
Campieri
The rubber was split, it needs it.
I wish I had been more diligent in my research so I could of been better prepared for that. I still feel bad that we couldn't swap that out at the same time...
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Posting Permissions
Reply With Quote
