What did you do for your ZHP/ BMW / MINI today? #2

[johnrando]

Good Stuff Charlie, Chris, Christopher, BP.

[cakM3]

Good Stuff Charlie, Chris, Christopher, BP.

Today Gary showed me where I can have engine temp/outside temp displayed on my navi display thru my Intravee which I found interesting. I also figured out how I can use my fog lights as DRLs while having all other lights in the off position as well as have my PDC display on my navi screen when backing up thanks to my Intravee interface. This device does a lot of pretty cool things! Both cars are now coded with these features

[Sockethead]

that's really cool!

[BMWCurves]

that's really cool!

+1.

If my car had factory navigation, I'd enable a lot of those features.

[terraphantm]

Did what should be my last round of maintenance before I start school

• Oil pan gasket
• New oil filter housing (check valve was broken on the original)
• Cold Weather PCV + Updated dipstick tube
• Hydraulic tensioner & pulley, idler pulley, AC pulley, and belts
• Waterpump, expansion tank, and hoses
• M3 engine mounts
• M3 transmission mounts
• ECS Stainless Brake lines + Motul DOT5.1 fluid
• Oil change w/ Castrol 0w-40
• Previously had done ZHP control arms, Z4M bushings, E46 M3 RTABs, upper/lower ball joints in the back, brakes + rotors, intake air filter, cabin air filter, and Pilot Sport AS3 Plus tires

Cosmetically this car is still a little rough around the edges, but mechanically it should be sound.

[san]

Did what should be my last round of maintenance before I start school

• Oil pan gasket
• New oil filter housing (check valve was broken on the original)
• Cold Weather PCV + Updated dipstick tube
• Hydraulic tensioner & pulley, idler pulley, AC pulley, and belts
• Waterpump, expansion tank, and hoses
• M3 engine mounts
• M3 transmission mounts
• ECS Stainless Brake lines + Motul DOT5.1 fluid
• Oil change w/ Castrol 0w-40
• Previously had done ZHP control arms, Z4M bushings, E46 M3 RTABs, upper/lower ball joints in the back, brakes + rotors, intake air filter, cabin air filter, and Pilot Sport AS3 Plus tires

Cosmetically this car is still a little rough around the edges, but mechanically it should be sound.

Man, that's a lot of work you've done...


Sent from my iPhone using Tapatalk

[D1ESEL]

Buying a 2nd e46 this week......

[Sockethead]

Did what should be my last round of maintenance before I start school

• Oil pan gasket
• New oil filter housing (check valve was broken on the original)
• Cold Weather PCV + Updated dipstick tube
• Hydraulic tensioner & pulley, idler pulley, AC pulley, and belts
• Waterpump, expansion tank, and hoses
• M3 engine mounts
• M3 transmission mounts
• ECS Stainless Brake lines + Motul DOT5.1 fluid
• Oil change w/ Castrol 0w-40
• Previously had done ZHP control arms, Z4M bushings, E46 M3 RTABs, upper/lower ball joints in the back, brakes + rotors, intake air filter, cabin air filter, and Pilot Sport AS3 Plus tires

Cosmetically this car is still a little rough around the edges, but mechanically it should be sound.

I'd rather have a mechanically sound car that's a little rough around the edges than a beautiful car that's a piece of crap underneath...

[das boots]

I'd rather have a mechanically sound car that's a little rough around the edges than a beautiful car that's a piece of crap underneath...

+1

[slater]

I'd rather have a mechanically sound car that's a little rough around the edges than a beautiful car that's a piece of crap underneath...

absolutely. plus, then you can park it without being paranoid of door dings.