What did you do for your ZHP/ BMW / MINI today? #2

[slater]

///M3 seats with full power, heat and bolster adjustment. A BIG thanks to slater for hooking me up with these and installing them for me as well.

The seats feel awesome!!

Oh and also picked up matt black front grill and window trim from Peter. Thanks again!

happy to help a brother out, man! glad you are enjoying them. i love mine!!

And here I am wanting to swap mine. Maybe when I get 6MT I can assign the paddles for something else? I would love it if I can pull one back to put my car into M track mode just prior to a fun open corner instead of trying to find the DSC button!

trevor... i've got a 6MT trans sitting here! i can ship you a full 6MT conversion kit.

[az3579]

happy to help a brother out, man! glad you are enjoying them. i love mine!!




trevor... i've got a 6MT trans sitting here! i can ship you a full 6MT conversion kit.

That's a different trans than the M3, less durable I think...

Sent from my LG V10 using Tapatalk

[slater]

That's a different trans than the M3, less durable I think...

Sent from my LG V10 using Tapatalk

yeah? i knew the ZHP trans has a slightly shorter 1st gear, didn't know there was other differences.

[330i Lover]

Took a few pics with no flash.





Sent from my SAMSUNG-SM-G900A using Tapatalk

[terraphantm]

yeah? i knew the ZHP trans has a slightly shorter 1st gear, didn't know there was other differences.

It's an entirely different transmission - ZHP 6-speed is made by ZF, M3 6-speed is made by Getrag. The ZF is a much newer design (M3 transmission dates back to the late 80s/early 90s), and generally shifts better IMO (very apparent when driving it back to back). Z4M uses a variant of the ZHP's transmission, so even if it can't handle as much torque as the Getrag, it should be able to handle an S54 just fine.

Challenges come from the 330 version of the transmission having a shorter input shaft, requiring the pilot bearing to be built into the flywheel itself. One can bolt up a 330 fly wheel to the S54, but I don't know if it's well matched to that engine. Z4M version of the transmission has a long input shaft and can be used with a standard pilot bearing in the crank.

[jakksfor20]

Did Leather Rejuvinator on the ZHP and the E36. The bucket was after doing just the passenger seat.


Sent from my iPhone using Tapatalk

[Rovert]

Terra you're such a brain!

[slater]

It's an entirely different transmission - ZHP 6-speed is made by ZF, M3 6-speed is made by Getrag. The ZF is a much newer design (M3 transmission dates back to the late 80s/early 90s), and generally shifts better IMO (very apparent when driving it back to back). Z4M uses a variant of the ZHP's transmission, so even if it can't handle as much torque as the Getrag, it should be able to handle an S54 just fine.

Challenges come from the 330 version of the transmission having a shorter input shaft, requiring the pilot bearing to be built into the flywheel itself. One can bolt up a 330 fly wheel to the S54, but I don't know if it's well matched to that engine. Z4M version of the transmission has a long input shaft and can be used with a standard pilot bearing in the crank.

wow, that's excellent info - thanks!!

[BimmerDude]

Tow hook Plate holder and bumper trim center. Still not sure how i feel about the toe hook holder though

[danewilson77]

Tow hook Plate holder and bumper trim center. Still not sure how i feel about the toe hook holder though

Looks good. Which one is it?

S7 Edge, out