That's the same one I used... I don't know how to describe how to use it but here's a pic:
Campieri
That's the same one I used... I don't know how to describe how to use it but here's a pic:
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Messaggero
YouTube????
Lawrence
"But Mama....That's where the fun is!"
BMW CCA #192742
San Diego & Sin City Chapter
NRA Lifetime Member
STABLE
'90 M3 AWII - Garage Queen (The Crown Jewel)
'20 X5 M Sport Tourquis Blue - #3 Son Ride
'23 X5 M Sport Sapphire Black - #1 Son Ride
'23 X5 M Sport Mineral White - Daughter & Grand Kids Ride
'24 X4 M40i Brooklyn Grey - SO's New Ride
'05 330i ZHP Mystic Blue Metallic 6 spd - My Ride
'03 Nissan Frontier XE Crew Cab - Hauler & Down Range vehicle
Wiseguy
Basically how it works is when you push it down on the fitting it pushes the plastic clip inward so you can pull the line off.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
Campieri
yep that's it... it's like magic.... it's nearly impossible to get the hose off without it
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Enforcer
Buy the tool and save yourself a little heartache. I did both my cars without it. I used a pair of vice-grips and a pair of pliers to accomplish the same thing. One car I was able to do both fittings in about 30 seconds. The other one seemed to take me about 20 minutes. Lots of cursing involved.Originally Posted by Sockethead
Sent from my iPhone using Tapatalk
Messaggero
How much would it cost on the low-end to get headers and cats installed (parts + labor)?
Messaggero
New or used headers? You can get headers off ebay for pretty cheap.
Messaggero
Yeah, something like the ebay headers would work. Though looking into it, I'm not sure the emissions complications are worth it. I want a few more decibels from the exhaust. A bit more performance would be nice, but I might just stick with the exhaust side.
Big Earner
Is this true?
Sent from my iPhone using Tapatalk
2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |
Capo
Is this true?
Sent from my iPhone using Tapatalk
Yes, but the adaptation stage is very very quick. I can reset mine and it'll be back to how it was within 15 minutes.
I wish there was a way to just keep the "reset" values - I really like those values.
BP
2005 330i ZHP / 6MT
Imolarot / Naturbraun
2003 330iT / 6MT
Orientblau / Naturbraun
It's not the car you drive, it's how you drive it.
Posting Permissions
Reply With Quote
