Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 348 of 826 FirstFirst ... 248298338346347348349350358398448 ... LastLast
Results 3,471 to 3,480 of 8258
  1. #3471
    Quote Originally Posted by az3579 View Post
    Yes, but the adaptation stage is very very quick. I can reset mine and it'll be back to how it was within 15 minutes.
    I wish there was a way to just keep the "reset" values - I really ​like those values.
    Did not know that, thanks BP!


    2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |

  2. #3472
    When replacing the OFHG is it necessary to replace the hex bolts as well? Seems like an overkill to me but the ecstuning kit has the bolts included...


    Sent from my iPhone using Tapatalk


    2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |

  3. #3473
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,980
    Quote Originally Posted by san View Post
    When replacing the OFHG is it necessary to replace the hex bolts as well? Seems like an overkill to me but the ecstuning kit has the bolts included...


    Sent from my iPhone using Tapatalk
    No. But remember each location of the bolts since they are different

    His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |

    Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |

  4. #3474
    Quote Originally Posted by Vas View Post
    No. But remember each location of the bolts since they are different
    Thanks Vas!


    Sent from my iPhone using Tapatalk


    2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |

  5. #3475
    Join Date
    Feb 2014
    Location
    Alexandria, VA
    Posts
    2,805
    Quote Originally Posted by san View Post
    When replacing the OFHG is it necessary to replace the hex bolts as well? Seems like an overkill to me but the ecstuning kit has the bolts included...


    Sent from my iPhone using Tapatalk
    No. And easiest way to do that is just get a piece of cardboard out and draw a little diagram and stuff them into it in the respective order.

    Current:
    1988 BMW 325is
    1996 Toyota Land Cruiser FZJ80 x3 Locked - Restoration/Project Thread on ih8mud.com
    Sold:
    "Scarlett" the 2005 BMW 330i ZHP 6MT - Project/Maintenance Thread
    2011 BMW M3 E92 6MT - Info/Maintenance Thread

  6. #3476
    Hello all! New poster here so forgive me if this is not the correct place for this question. I did figure though that this is the kind of random question this thread was made for. So I bought my ZHP recently, a 2006 330ci, and in fact just registered it yesterday. The car runs and drives beautifully. However, there is one small thing that does in fact bug me, as I'm sure it would bug some of you as well, if you're half as anal as I am. Anyway, when looking at the front of my car, I noticed that on one side of the grill, it is flush to the light fixture/trim while the other side seems to be a little askew and further in front of said trim. I thought maybe this could be fixed by adjusting the hood but I thought to come here and ask before I go messing about. Here are a few pics... Any help would be much appreciated! Name:  image.jpeg
Views: 344
Size:  1.18 MBName:  image.jpeg
Views: 369
Size:  2.16 MB
    If these pictures don't do it justice just let me know. Thank you again!

  7. #3477
    Quote Originally Posted by JAIm255 View Post
    Hello all! New poster here so forgive me if this is not the correct place for this question. I did figure though that this is the kind of random question this thread was made for. So I bought my ZHP recently, a 2006 330ci, and in fact just registered it yesterday. The car runs and drives beautifully. However, there is one small thing that does in fact bug me, as I'm sure it would bug some of you as well, if you're half as anal as I am. Anyway, when looking at the front of my car, I noticed that on one side of the grill, it is flush to the light fixture/trim while the other side seems to be a little askew and further in front of said trim. I thought maybe this could be fixed by adjusting the hood but I thought to come here and ask before I go messing about. Here are a few pics... Any help would be much appreciated! Name:  image.jpeg
Views: 344
Size:  1.18 MBName:  image.jpeg
Views: 369
Size:  2.16 MB
    If these pictures don't do it justice just let me know. Thank you again!
    Welcome! Has the vehicle been involved in any sort of accident?


    Sent from my iPhone using Tapatalk


    2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |

  8. #3478
    Quote Originally Posted by NoVAphotog View Post
    No. And easiest way to do that is just get a piece of cardboard out and draw a little diagram and stuff them into it in the respective order.
    Thanks Dan!


    Sent from my iPhone using Tapatalk


    2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |

  9. #3479
    Quote Originally Posted by san View Post
    Welcome! Has the vehicle been involved in any sort of accident?


    Sent from my iPhone using Tapatalk
    According to the previous owner a small frontal one, but he replaced the bumper and hood with oem parts... Which is why I was hoping it was just misaligned. I also checked the area behind it and behind the light to see if there was any damage on the inside that would not be seen from the outside, and everything seems to be alright I.e. No damage, or at least to my untrained eye.

  10. #3480
    Join Date
    Jul 2011
    Location
    North San Diego, Las Vegas
    Posts
    1,981
    Welcome. Enjoy your stay.

    As for the grills. I also recently replaced my grills to the Gloss Black. This is just me. I am not too into the black grills. They do not really seat that well. There are gaps. And they are lose. Maybe I just might decide to remove them and put back the chrome grills. And sell the black grills.

    Hopefully my response helps.....the grills are not perfectly fit and seated.
    Lawrence
    "But Mama....That's where the fun is!"
    BMW CCA #192742
    San Diego & Sin City Chapter
    NRA Lifetime Member

    STABLE
    '90 M3 AWII - Garage Queen (The Crown Jewel)
    '20 X5 M Sport Tourquis Blue - #3 Son Ride
    '23 X5 M Sport Sapphire Black - #1 Son Ride
    '23 X5 M Sport Mineral White - Daughter & Grand Kids Ride
    '24 X4 M40i Brooklyn Grey - SO's New Ride
    '05 330i ZHP Mystic Blue Metallic 6 spd - My Ride
    '03 Nissan Frontier XE Crew Cab - Hauler & Down Range vehicle

Page 348 of 826 FirstFirst ... 248298338346347348349350358398448 ... LastLast

Similar Threads

  1. Random Picture Thread
    By tripod06 in forum Everything Non ZHP (the place for non-ZHP photos)
    Replies: 1144
    Last Post: 03-03-2025, 05:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •