Bmwvin works fine for me.
Bmwvin works fine for me.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Mine (2006 coupe) had the premium package but garage door openers weren't included.
![]()
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
I have a 2004 sedan with about the only major option being heated seats. I have the homelink buttons by the sunroof switch.This seems pretty weird.
Regarding that mechanical fan replacement, is there a wiring connection there that allows it to be hooked up and are all of the relays and everything included with the part number shown above? Any coding changes? I have a MT and AT ZHP so I could look at the MT if needed. This should make the car quieter on the highway I would think.
Sent from my iPhone using Tapatalk
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Are you referring to a Mechanical Fan to Electric fan conversion? Here are two comprehensive DIYs that should help you out:
http://forum.e46fanatics.com/showthread.php?t=884299
http://e46fanatics.com/forum/showthread.php?t=849735
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
Yes, that should answer everything. The thermostatic fan clutch needs replacement, I might as well look at doing this instead.
Sent from my iPhone using Tapatalk