I'm using a similar amazon product, with the magnet and all, and I can say I'm a huge fan of the flexibility of the amount of positions you can put it in- I also love people's reactions when I just slap my phone on my dash and it sticks
Messaggero
I'm using a similar amazon product, with the magnet and all, and I can say I'm a huge fan of the flexibility of the amount of positions you can put it in- I also love people's reactions when I just slap my phone on my dash and it sticks
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Messaggero
It doesn't look like it's on the inside of the projector lens. Just pop off the lens cover and wipe the outside of the projector lens. It's an easy fix. You probably don't need to change anything else if you don't want to.Originally Posted by Prestovie
Messaggero
Yeah I have one of those mounts too. I never use it though lol It's a Spigen one. I got it for free during one of those SD price mistake things. It messes with my wireless charging so that's why I never use it.
Messaggero
Really? Well that's good to know, I'm probably gonna go check it out right now and see what I can do
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Big Earner
It definitely looked to be on the front of the lens; I'm sorry if it seemed I was suggesting it was on the backside. Use rubbing alcohol to clean it and you should be good to go.
Sent from my iPhone using Tapatalk
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Messaggero
Phew well I just got back from fixing it(wish I saw that tip about rubbing alcohol, I just wiped it off with a clean microfiber)
It was easy but also just a pain in the A, some of those 8mm bolts are in the most ridiculous spots, ended up having to connect three socket extensions together lol
But here's the finished product
My nerves are at rest... for now
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Messaggero
Why did you need to take out the bolts? All you needed to do was take the corner off and then the trim at the bottom. You can pop off the lens while it's still on the car lol
Messaggero
Omg really... yikes lol there goes thathelpful information for the future
I can see how to do it now that I think about it, oh well the passenger side will be that much easier then haha
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Campieri
Reminds me of one of my favorite quotes: "Experience is something you don't get until just after you need it"
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Boss
yup, good one.
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Posting Permissions
Reply With Quote
