Spacers arrived today. 12.5F, 15R. I'll go out for a jaunt after dinner and see what I think.
Sent from my iPhone using Tapatalk
Big Earner
Spacers arrived today. 12.5F, 15R. I'll go out for a jaunt after dinner and see what I think.
Sent from my iPhone using Tapatalk
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Capo
They are right near the gas filler tube. Some type of vents. One goes to the charcoal can.Originally Posted by Sockethead
I hooked the smoker up to the fuel filler (after not finding any issues on the front End previously). We were a bit worried about doing it as I'd never heard of anyone doing it this way but what the heck... Anyway smoke started stream out from the rear near charcoal canister. I pulled the rear right wheel and dropped the back well shroud and voila!... found this rusty turd.
PN 16137177237
Supposed to look like this.
Capo
Boss
Cool that you could hv a mini meet
Sent from my SM-G935V using Tapatalk
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Campieri
Good find! Probably never would of found that without the smoker.They are right near the gas filler tube. Some type of vents. One goes to the charcoal can.
I hooked the smoker up to the fuel filler (after not finding any issues on the front End previously). We were a bit worried about doing it as I'd never heard of anyone doing it this way but what the heck... Anyway smoke started stream out from the rear near charcoal canister. I pulled the rear right wheel and dropped the back well shroud and voila!... found this rusty turd.
PN 16137177237
Supposed to look like this.
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Capo
^ yeah I think you are right. One clue was I noticed a gas smell on that side after I parked when I'd fill the tank and then drive it.
Big Earner
Removed front electric fan after doing an electrical/mechanical fan swap.
Painted this while the bumper was off. It didn't come out as well as I hoped. Oh well.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Campieri
Don't you just hate BMW plastic? It's so brittle!
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Big Earner
Ugh. Don't even start me.
One of the plastic push rivers got stuck so bad. I had three different pry tools and all I did was eventually tip the plastic apart. Then I had to drill out the remainder. So dumb.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Messaggero
Shawn, in your opinion should this be a PM item for our cars?
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
Posting Permissions
Reply With Quote
