Laminix makes a yellow covering you can just put over the lens
Big Earner
Laminix makes a yellow covering you can just put over the lens
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Messaggero
between 250-350 for the mirrors. depending on condition.Originally Posted by BMWCurves
just use lamin-x yellow film. otherwise, i guess you can try staining the glass.
you'll need to buy new foglight housings. the DEPO ones are actually pretty close to OE quality. They just have thinner glass and the adjustment screw is a little different.
Messaggero
Sorry I wasn't technical about it lol, think my point got across either way I put it. But that makes sense, thanks, someone needs to hollow out an air filter and cram it in there for... uses
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Messaggero
Was thinking about this recently after my old lanyard broke (KPMG) and I was wondering why I don't see a ZHPmafia lanyard on the cafepress site? Has it been brought up here before? Either a lanyard or a keychain of some sort would be really cool imo, thoughts?
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Messaggero
Something like this:
Messaggero
that looks ugly imo lol
Messaggero
Well alrighty then
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Big Earner
What about a simple monochromatic theme? White/grey lanyard with black text (keep the car red, of course)?Something like this:
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Big Earner
Did any of you change the oil dip stick tube when replacing the ccv system? I didn't when I replaced the ccv on my Zhp but noticed that ecs tuning recommends it...
Sent from my iPhone using Tapatalk
2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |
Campieri
You don't need to replace the tube unless it's damaged but you should replace the o-ring on it
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Posting Permissions
Reply With Quote
