Sure
Sent from my iPhone using Tapatalk
Sure
Sent from my iPhone using Tapatalk
Last edited by roadbiker_2; 03-11-2017 at 03:56 AM.
Do the ZKW and AL headlights need different plastic lens replacements?
edit: Found the thread. It seems that either one should work.
What is the fix for the foglights fogging up?
Also, should the headlight lens gasket be replaced when replacing the lenses? Is that a typical replacement item?
2006 6MT Coupe, Alpine White • Premium, Cold Weather and Xenon packages
MFactory 3.38 LSD • 27mm M3 bar • ECS strut brace • Koni FSD's
Other tweaks: see my profile
It's a 2004 sedan.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Quick Q: noticed that when I took my front left wheel off there was a nice 6in crack going down the front bumper wheel well. Nothing major but I mean it's there haha, I have found a couple of curbs on occasion but I didn't think I cracked the bumper... :/ ideas? I mean other than getting a whole new bumper, can it be repaired and will it effect anything? Can't be seen without taking wheel off(when looking at wheel well it's on the inside left by that fog light duct
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Any pictures?