Originally Posted by
terraphantm
Is your DSC module from an M3 or from the 330i? If it's from the 330, you'll have to access it with the *EV53 code.
For PASoft, for some reason it's a bit buggy when accessing M3 clusters. If you go into the EEPROM to change the coding index to 08 (change the value at 0x317 from 24 to 08), then the coding submenu should work. If you leave the eeprom like that, you'll have to change the VO back to *EV53 to access it (but the cluster will be coded with 330i settings rather than M3 settings, so you may have to make other edits where relevant).
Cluster will not sync the mileage unless its mileage is zero and VIN mathces the LCM. DME VIN doesn't matter.