Can you post (or PM me) a pic of the line across the top of the grille?Originally Posted by Prestovie
Big Earner
Can you post (or PM me) a pic of the line across the top of the grille?
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Messaggero
I only have one other picture of the grilles on me right now, I'll be back to the house later tonight to take a better picture
What do you mean by the line?
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Messaggero
The line where the top horizontal section meets the vertical side sections.
2006 330ci ZHP - Silbergrau Metallic / Stoff Laser/Anthrazit / Alu Black Cube trim / Adaptive Xenon headlights / HK hi-fi system / heated front seats
Capo
I think that's the perfect amount for black interiors. I have roughly the same (38% + factory window meters out to ~35% total). Like you say, the black interior makes it look darker than it is.
Not bad. If you're not keeping the rotor, just get a rubber hammer and bang away on the outer diameter of the rotor in a star pattern. It should break it loose.
Messaggero
[QUOTE=BMWCurves;533780
Not bad. If you're not keeping the rotor, just get a rubber hammer and bang away on the outer diameter of the rotor in a star pattern. It should break it loose.[/QUOTE]
It's the bolt that holds the rotor onto the hub so I can't even hit it off right now
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Messaggero
Oh wow I never even noticed there was a line like that, assuming the kidneys are pretty different if the sedan doesn't have those lines?
Sent from my iPhone using Tapatalk
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Capo
I guess my brain just decided to read that part and said "fuck it, ignore it." I had seized bolts on mine as well. Just put some PB blaster on it and used a breaker bar.
Big Earner
It's a line that ECS puts in their mold assumably to avoid patent infringement since BMW makes gloss grilles now.
Messaggero
Washed my car today
Sent from my iPhone using Tapatalk
Wiseguy
Here are my ecs sedan gloss kidneys, no line. Excuse the dirtyness.
Posting Permissions
Reply With Quote
