+1 i get cardiac palpitations every now and then when I'm arrousedOriginally Posted by 704sw
Enforcer
+1 i get cardiac palpitations every now and then when I'm arroused
Big Earner
Enforcer
You should have seen the look my boss gave me while I shredded the box open
Campieri
Khoalty.
2005 IR / black / 6MT159,000 miles
Campieri
I forget, the AL and ZKW lens are interchangeable?
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Big Earner
From my understanding yes they are
Campieri
Yes.
Sent from my Pixel XL using Tapatalk
Porsche 944 Turbo Build
One ride and you'll understand why most rocket scientists are German.
My ZHP Build 2004-2014 RIP
Campieri
Aewsome, thanks guys!
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
Capo di tutti capi
Sent from my SM-G955U using Tapatalk
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Associate
Well, so far they've been great... I have them both placed in the passenger side, about an inch apart or they rattle... as expected
Build quality is great too. Pliable Metal on the outside, with soft felt type material on the inside. They hold the drinks firmly and out of sight/mind so you can focus on driving.
As far as fitment goes, it looks like they weren't made for weather-tech type floor mats - the lip on those seems to get in the way of the cup holder laying flush. However, I just put them up a little higher to accommodate, and that was an easy fix.
Can fit just about any cup size... I've transported larger drinks, water bottles, and even coffee with a lid stopper, without issue.
Cleaned up my center console quite a bit.. my OEM cupholders had seen better days.
Works as described!
Posting Permissions
Reply With Quote
