Any thoughts on what a set of 2 Burger Tuning 12mm spacers should cell for with 9! Extended lug bolts?
Capo
Any thoughts on what a set of 2 Burger Tuning 12mm spacers should cell for with 9! Extended lug bolts?
Enforcer
so i removed my back seats tonight to fix my seat belts, and noticed this wire just hanging out not connected to anything. Does anyone know what it is for? I started the engine and it seemed to run fine, so i don't think it is from the fuel pump? Just a little concerned something that should be plugged in is not...
~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality
Big Earner
Your best bet is to add a 10th bolt to your next ECS order and sell them as a set.Originally Posted by ELCID86
Any thoughts on what a set of 2 Burger Tuning 12mm spacers should cell for with 9! Extended lug bolts?
We all have that little guy hanging around. Prevailing theory is that it's used in transport and never again.so i removed my back seats tonight to fix my seat belts, and noticed this wire just hanging out not connected to anything. Does anyone know what it is for? I started the engine and it seemed to run fine, so i don't think it is from the fuel pump? Just a little concerned something that should be plugged in is not...
Enforcer
Oh thank God
~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality
Big Earner
I love how to this day, nobody truly knows wtf that was used for.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM
Big Earner
Part of me hopes the answer is never confirmed. It’s good to keep a little mystery in the relationship.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Messaggero
Im in the process of replacing my front fender. One T30 screws on top is being a pain in the ass. I've been soaking it WD40 but it won't budge. Anyone have any other tips for loosening it up? Its starting to strip a bit and i don't want to take any more chances with it.
Big Earner
I assume you’ve hammered the bit into the head and everything? One of the torx on my DISA was stripped, and I had to drill it out. I’ve replaced a lot of the torx bolts with new SS hex hardware.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Messaggero
hmmmm. no thats a good idea tho. let me run out and give it a shot.
Messaggero
you know, i'm all about doing things like james may, but sometimes you gotta take a page out of clarkson's book. Hammers are good. That worked perfectly.
Posting Permissions
Reply With Quote
