BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
My "Smurf" will also be getting a more updated factory head unit.... still more work before it is perfect but this is how he head unit looks...
Sent from my iPhoneX using Tapatalk Pro
Last edited by cakM3; 10-10-2018 at 05:55 PM.
Doing the timing belt/water pump service on my Audi this weekend since the previous owner did not remember when the last service was performed. Car has 166k on her so there are a few things I need to address to keep this rare Nogaro in tip top shape...
Breaking down
Front end off and draining coolant
AC cooler set aside for maintenance
Found out the last timing belt/water pump service was done at 119k.
Well, since I was already into this I decided to change everything out and zero the clock so to speak. It was also a good learning experience for me getting to know what is required for Audi maintenance...
All interference removed to expose the conti timing belt... note my Nogaro already has the metal thermostat housing!
Cam lock tool, a necessary tool for setting your cam when replacing the timing belt...
Old timing belt removed...
Here are a few pictures of the old Conti timing belt. Not a single stress crack could be found. Belt easily had about another 40k miles of life left in her but I won’t be reusing this so off to the trash for this part...
Installed the new water pump and started cleaning the front part of the motor.
With the new Gates Racing timing belt installed my friend and I are installing the tensioner pulley.
Turned out the passenger exhaust cam was off by a tooth so we had to take off the belt and redo this step...
This part is a pain but getting everything perfect has to be done here...
My friend and I ended up doing this 3X before it was finally done...
Car bit me this morning...
All part of maintenance.... you can say that the car is now mine... there will be more done to my Nogaro Audi over the next few months...
Sent from my iPhoneX using Tapatalk Pro
Last edited by cakM3; 11-11-2018 at 05:25 PM.
Timing belts...I do NOT miss those things. Necessary evil though. Good work.
-Corey
2003 Blue ZHP Sedan @ 210k
Dead due to damaged valve. Parts are being transferred to a wagon:
2003 325iT Japanrot 6MT @ 230k
I heard water pump and timing belt was a complete front end tear down...
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers
You’re right. For the Audi this is a necessary evil but has to be done every 100,000 miles. I can live with that!
It is Rob but it is really not too hard to break down the front end of the B5 Audi. Just time consuming, that’s all. Perfect time to do this is over a three day weekend
Sent from my iPhoneX using Tapatalk Pro
Fine tooth comb detail as always Charlie!
Looking Good!
Sent from my iPhone using Tapatalk
Dinan; Hign Flow Intake System, & Strut Tower Brace
Turner Motorsports; Underdrive Power Pulleys
Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
Stewart High Performance Water Pump
Hawk High Performance Street 5.0 Brake Pads
Brembo Rotor
The purposeful face of a formidable athlete:
The spine-tingling 330i Performance Package.
Purchased CPO on 12/23/2006 with 28,090 miles
Thanks Guy!
Found a good indy shop where both of my Audi’s will be serviced at
These guys all are car enthusiasts so they all understand where I’m coming from regarding maintenance and what I want to do...
You would never know looking outside but these guys are good
They work on BMW/Audi and VDubs
Sent from my iPhoneX using Tapatalk Pro
Cool!![]()
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
+1
Sent from my SM-G955U using Tapatalk
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture