That dude LOVES to slather his engine bay in engine dress up. Holy shit
Big Earner
That dude LOVES to slather his engine bay in engine dress up. Holy shit
2005 BMW 330i ZHP - BMWP calipers/intake/strut bar/shifter, M3 CSL front/M3 rear rotors, Coby wraps interior, BBS CH wheels, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
Enforcer
LmaoOriginally Posted by BADCLOWN
I literally LOL’d, looks like buttaaaaa
Sent from my iPhone using Tapatalk
Enforcer
dude needs to wipe.
~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality
Enforcer
Anybody know how I can get some ZHPMafia stickers? If not I’ll be making some of my own, just tempted to buy before DIY’ing it lol
Sent from my iPhone using Tapatalk
Campieri
Check post 188 here.
http://www.zhpmafia.com/forums/showt...Sticker-Thread
2005 IR / black / 6MT159,000 miles
Soldier
Lol, Picture was taken while waiting the 20 mins after applying until wipe down, per the directions. Trust it looks much less shinny now.
Enforcer
Does anybody know the wiring diagram for the power rear sunshade to the button panel?
From what I understand it should be plug and play as long as I have the proper center console button switch, but do I have to tap into the fuse box at all? Or do I just run the white+yellow wire from the sunshade to the button panel & insert the two wires into the proper pinouts behind the switch panel wiring loom?
A little bit of a wiring noob but I’m going to retrofit this & PDC (Maybe) lol
Sent from my iPhone using Tapatalk
Messaggero
Any chance there’s a way to replace the light bulb clips for the fog lights? Not talking about the pesky trim piece, but due to just giving up on those my wiring and end clip found there way to drag on the road beneath my car and got eaten up pretty bad.
While I’m on the topic, are there any reliable trim pieces out there for fogs? Been through 3 from ECS
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
Messaggero
Are you talking about the connectors themselves? If so, then yeah you can buy the connectors and some wiring to replace them from BMW. It'll requiring you to solder/crimp the connections though. You can also just buy an aftermarket 9006 connector as well if you wanted to.
Enforcer
Anybody know if Power folding M3 mirror motors are interchangeable between the M5 & sedan?
Want to do the power fold mod on my sedan mirrors
Sent from my iPhone using Tapatalk
Posting Permissions
Reply With Quote