Quote Originally Posted by Fried_Chicken View Post
64218376999 it is.

I already ordered the part from Elaplast, apparently they’re German OEM. Hopefully I can get it sorted and be on my merry way. For bleeding, I turn the heater on, fan on medium, park the car on an incline, leave the expansion tank open, and keep pumping fluid until the appropriate level is reached?
For bleeding procedure see below,

Loosen the coolant expansion tank bleeder screw. Turn the ignition ON (do not start engine), set the temperature controls in vehicle interior to full warm and blower fan speed on low. Slowly fill the expansion tank until coolant level is at the top. Install coolant cap and start the engine. Run engine until coolant is coming out of the expansion tank bleeder screw and is free from bubbles. Once coolant is free of bubbles, tighten the expansion tank bleeder screw.

Shut the engine OFF and allow it to cool. Check the coolant level in expansion tank. Top up coolant until level indicator is at MAX. Once at MAX, your cooling system is full.*

Sent from my Pixel 4 XL using Tapatalk