Quote Originally Posted by cakM3 View Post
This DIY thread is in serious need of being updated featuring Sergy's 3D printed mirror motor baseplates. As I start doing this retrofit on my ZHP this Spring, I will be renovating the procedures outlined in this DIY and using new pictures from my upcoming retrofit on my first post in this DIY.

I also plan to write up differences in mounting OEM M3 side mirrors on ZHP coupes and vents in this DIY as well primarily focusing on swapping in the ZHP mirror motors into the OEM M3 mirror housings.
I really appreciate that - I would like to put M3 mirrors on down the road (I believe plug and play for coupes), but helpful for everyone, even outside the Mafia.