I thought I share the options I've done on my ZHP.
https://goo.gl/Vp27dn
I thought I share the options I've done on my ZHP.
https://goo.gl/Vp27dn
Last edited by derbo; 05-04-2018 at 01:03 PM.
Do you have the specific lines that need to be changed said mods?
Sent from my SM-G900T using Tapatalk
In the market for an E90 M3
I did alot of this with BMW Scanner. Seems my only issue is that after using one touch to roll the windows down, when i open and close the door the driver window rolls back up. Seems like you have a code for that but I cant get NCS to work
Modification ThreadOriginal Car: Silver Grey on Grey, A/T (1 of 186)
As it sits: Silver Grey on Black, M/T (1 of 51)European Auto Source TechInstagram: @CarbonZHP
Sounds fun. Ive also been told that my OBD cable might only work for BMW Scanner? Even though it has access to all the systems
Modification ThreadOriginal Car: Silver Grey on Grey, A/T (1 of 186)
As it sits: Silver Grey on Black, M/T (1 of 51)European Auto Source TechInstagram: @CarbonZHP
Modification ThreadOriginal Car: Silver Grey on Grey, A/T (1 of 186)
As it sits: Silver Grey on Black, M/T (1 of 51)European Auto Source TechInstagram: @CarbonZHP
Or this
Modification ThreadOriginal Car: Silver Grey on Grey, A/T (1 of 186)
As it sits: Silver Grey on Black, M/T (1 of 51)European Auto Source TechInstagram: @CarbonZHP
Double check that pin 7 and 8 are connected together. Either you can solder a connection between pin7/8 on the cable or buy an adapter if it isnt.
http://www.one-stop-electronics.com/...&product_id=16
I bought a cable from Ebay similar to your 1st link and just got an adapter from one-stop-electronics
http://www.one-stop-electronics.com/...&product_id=19