Quote Originally Posted by Sockethead View Post
I had a hell of a time getting the intake hose mated to the Dinan Air box. I had to cut off quite a bit
And I had to cut it on an angle. It was a bitch getting that hose onto the idle control valve so there was no way I was going to take the whole hose off and on several times to get it to fit so I used hose clamps and an exacto knife with a new blade. It worked really well.

Brilliant! I wish I had thought of that. My cut wasn't very straight With the BMW Performance intake I had to cut it at a slight angle too in order for it to mate up properly.