What did you do for your ZHP/BMW today?

[danewilson77]

Just got back from a tiring day of work/school. Got an alignment today too for my trip on sunday/monday and since I never got one from my suspension install ~1,000 miles ago.. I figured that it would be a good idea. $130 isn't that bad I guess. Usually they charge me $70 for it but today it was somehow $90 + camber bolts? Apparently the camber bolts are recommended being changed out every time you get an alignment because they've "been known to break" OK, sounds good enough to me.

Has to be complete bullshit.... Unless they're talking about the camber bolts in the rear.

^ hmmmm, had mine done at the dealer last week. $160 and they did not replace parts.

Yeah...one was $152.00 incl tax.

This




Started my detailing for the trip south

Looks amazing Chuck.

Lol, yeah, I was laughing when I was removing the tank... wondering how many things you could possibly connect to a washer fluid reservoir.

It was pretty easy, though.

I took some pics with the intention of banging out a quick diy for those not normally comfortable doing stuff themselves.

It'll be up in a few hours.

I wish this was sent with a Galaxy S3

Good man. Thanks

Sent from SIGFest 2012

[jayjay_dee]

oh well, i receive my Enco B146(Dynavin Clone) this afternoon and was so excited to install it...

First, i had to uninstall the Parrot Bluetooth kit I installed last summer, took me 30 mins.

Then, another 30 mins to put in the Dynavin clone.... After pressing the power button, nada....
blank screen, tried the reset button, no dice still, blank screen... Drove around my block to see
if it would do magic... same result, blank screen... but all this time, the backlight is on and nice...

I just wasted this whole afternoon for this non working Enco B146... I already IM'd Jolly thru Skype
but its already Saturday morning in China so I dont expect a response from her until monday there.

SUCKS!!! Very frustrated right now....

[HokieZHP]

Gave her a MUCH needed wash! Got some action with the sonax as a result of breaking in my new ceramic pads...

[kayger12]

oh well, i receive my Enco B146(Dynavin Clone) this afternoon and was so excited to install it...

First, i had to uninstall the Parrot Bluetooth kit I installed last summer, took me 30 mins.

Then, another 30 mins to put in the Dynavin clone.... After pressing the power button, nada....
blank screen, tried the reset button, no dice still, blank screen... Drove around my block to see
if it would do magic... same result, blank screen... but all this time, the backlight is on and nice...

I just wasted this whole afternoon for this non working Enco B146... I already IM'd Jolly thru Skype
but its already Saturday morning in China so I dont expect a response from her until monday there.

SUCKS!!! Very frustrated right now....

Ugh. Sucks. Sorry to hear.

[midlandtech]

Blew the cob webs out of it last night against a E36 328ci on NOS (ZHP drove around him btw) and found a garage to park it in during tonight's storms...


~Steve
Sent from my iPhone using Tapatalk

[carsontl]

Look who came home today! With updated grill/side markers/reflectors and door speakers!

Question: How can I absorb all the moisture in left headlight? Never happened before I took it into the shop...

[Johal E32]

^Might want to replace the sealing gasket that goes in between the headlight and headlight lens.

[kayger12]

^Might want to replace the sealing gasket that goes in between the headlight and headlight lens.

Coupe has sealed headlights. No gasket to replace.

Shouldn't be getting moisture from that unless the headlights were baked in the past and they didn't seal up properly.

I would take a look at the rubber boots at the back of the headlight assembly where the bulbs and harness are.

That might be your issue.

I wish this was sent with a Galaxy S3

[carsontl]

Now that you've said that, when he took the headlight off he didn't get a full clamp on the windshield fluid and it started leaking... I bet it got into the headlight somehow...

[carsontl]

Tried to put my ///M dead pedal in today and discovered they aren't the same dimensions (notice the curve on the front of both and placement of the pedal itself)

So did I buy the wrong one? Or is this just not possible?