What did you do for your ZHP/ BMW / MINI today? #2

[Johal E32]

Haven't done much lately. Installed 15mm spacers up front (new et is 20). Rear still rubs (et 35 w/ 255s) Should have done 225 square on the 18x9 rims with more low :/

Also installed ambers back up front, and painted my headlight housings black, installed 2500k fogs. Full paint wet sand and buff!

I'll try to get pics up soon.. My friend wants to use my car for his photo project haha. Perfect way to get some nice dslr shots!

Old pic from Eric Luis, imagine the spacers, ambers etc.. lol




Jordan's E46 by NedsBimmer, on Flickr

Planning on an M-tech 2 very soon. The paint looks a bit better now after the wetsand. She still needs a respray though..

[danewilson77]

Wagon looks great J.

Sent from my Samsung Galaxy S4

[330i ZHP]

+1

[3ZHP]

At BMW of Chattanooga getting a wheel alignment done.


Sent from my iPhone using Tapatalk - now Free

[johnrando]

Plus 3. Noticed my oil cover was missing. Did some research and turns out BMW stopped putting them on our cars according to e46f.c, but I got one anyway, it was under $10.


Sent from my DROID4 using Tapatalk 2

[Hornung418]

Plus 3. Noticed my oil cover was missing. Did some research and turns out BMW stopped putting them on our cars according to e46f.c, but I got one anyway, it was under $10.


Sent from my DROID4 using Tapatalk 2

I need one of those and the belly pan. I think its ridiculous how they go missing during oil changes.

GS3 + TT4

[johnrando]

Justin, getbmwparts.com for the small cover. Not sure about the belly pan.

51-61-7-199-687 Cover 5.94
07-14-6-981-767 C-clip nut .97

[trancenation]

Thanks JR. I forgot that I was missing this as well.

Justin, getbmwparts.com for the small cover. Not sure about the belly pan.

51-61-7-199-687 Cover 5.94
07-14-6-981-767 C-clip nut .97

[Lanister]

Ever since I bought the car, the yellowed out side flashers were bugging the hell out of me. The car had this "aged" look to it. So the day has come for a nice set of white ones. Back to show room condition! (I wish)

When I took them off, the rubber seals were toast as well.

Some before and after shots for your viewing pleasure.

[BCS_ZHP]

The vert is sitting at 49,990 this evening, she got a fresh oil change today as well as new belts. Checked w/p shaft and it was tight, tensioners no noises and rolled freely, no play in any of those bearings at all, FTW. When belly pan was off its amazing how clean the engine is on my wife's car, like brand new.