Mountain run today. Big group. Lots of fun. I really love the new suspension tire setup.
![]()
"Cam"
2009 Ultrasonic Blue Mica/Alpine White ISF
1998 Nassau Blue/Grey C5 Corvette 6spd Sold
2003 Imola Red/Alcantara 330i ZHP 6spd Sold
2002 TiAg/Black M3 6spd Sold
Yeah, I can understand the rust thing, but if you really want a clean, no rust car, go to Arizona... We bought a '65 Mustang back in the day from there, it had ZERO rust... Even after 25 years...
And to be honest, I used to think CA had insanely clean cars, but I think Florida keeps their cars cleaner. Not to mention, Florida seems to have a lot more disposable income, a lot of ridiculously expensive cars here, driven every day...
I saw a brand new Bentley at Home Depot... And a few days later, I saw an F10 M5 (highly modded) at the same Home Depot...![]()
2011 E90 Lemans Blue/Bamboo Beige M3- Harrop Supercharged IG: lmb_zcp
2013 F25 Alpine White/Chestnut X3 35i- Family Hauler
2006 R53 British Racing Green/Panther Black Mini Cooper S FOR SALE! DM for details!
Past: 2010 X5M, 2014 328d, 2003 330i ZHP, 2004 330i ZHP, 2012 X3 35i
WTB!! 2009-2012 E91 328i Touring Contact me with info!
Today I let the ZHP take a break and took my buddies sail boat for a spin instead.
Got passed my this on our way back to the ramp from our lunch stop.
Sent from my SCH-I545 using Tapatalk
2005 IR ZHP Alcantara 6MT l Bimmian phone mount l Khoalty Angel Eye's l Khoalty Fog's l AFE Stage 1 Intake l AFE Dynamic Air Scoop's l CDV Delete
Besian Sealed VANOS l Flat black Kidney Grills l Magnaflow Cat-Back
2005 IR ZHP Alcantara 6MT l Bimmian phone mount l Khoalty Angel Eye's l Khoalty Fog's l AFE Stage 1 Intake l AFE Dynamic Air Scoop's l CDV Delete
Besian Sealed VANOS l Flat black Kidney Grills l Magnaflow Cat-Back
I met up with a few Boston BMW CCA members and Chad as well. Brought some burgers to cook on the grill and we purchase some pizza as well. I finally did a transmission and differential fluid change. Also I had change to the BMW performance short shifter. Really made a difference with the distance of travel on the shifts. I have never done it before however it was really easy with some help of experience friends. Just a note that the BMW short shifter doesn't require washers on the side. It is now integrated into the shifter.
Chad on the other hand just completed a oil filter housing gasket along with replacing the oil separator since winter is coming. It was a good 5-6 hour job however it's a nice thing to do before the winter freezes up the pipes. My third time doing this job and I pretty much memorized every single bolt/nut that belongs to each part. I never wish to do it again!
Tony's ZHP "Wulf" '03 Silver Gray | Valentine 1 Radar Detector| Alcantara | BMW Performance Intake | F10 M5 Knob | Auto-dim Retrofit | BMW Alarm | Performance Grilles | OEM Roof Rack | Rain Light Sensor Retrofit | Eonon D5150 Head Unit | BMW OEM Clear Lens
Thanks, my schedule is so busy that I may have to live with them through the winter.
Some of them include paint damage, hoping PDR plus some touch up paint can get me by for a few years until I can have the entire car repainted.
Thanks, I had a bit of a melt down about it, but I'm better now. I'm in the "acceptance" phase, lol.
Those look pretty good actually for winter. We've all seen worse! As for the hangars, I have a pair of hangars that I think were a BMW accessory. I don't exactly recall where I got them actually (owned the car too long). I don't use them with my VMR's though, just with my OEM's and/or doughnut spare.
As I said above, I'm in the "acceptance" phase, thanks for the backup, but I'm not going to regress into the "anger" phase, lol.
I know what you mean about tetris, for the past few years I have had a tub of "extra" parts in the back of my car. I decided yesterday NO MORE! But yes, we have played tetris a few times when we have out in the ZHP and decided to randomly stop somewhere for some heavy (or even light) shopping. The car gets small real quick!
--------------
Today/tonight I attempted to clay the car. I don't think I got the hang of it until I got to the hood (after doing the trunk, rear bumper and roof). I think I was putting too much lubricant down, the clay didn't really shrink in size like I've seen people talk about online. I then followed with a coat of cleaner wax and a final coat of wax. I don't think I'll be going back to re-do the work I've already done; I'll just take the experience forward to finish the car (tomorrow and tuesday) and remember next time when I do those panels again.
- 2021 Tesla Model Y LR-AWD '21-
- 2014 CPO i01 BEV Capparis White Tera World, '17-'20
- 2015 CPO i01 BEV Laurel Grey Tera World, '17-'18 R.I.P
- 2015 i01 REx Laurel Grey Tera World, '15-'17
- 2003 CPO 330i ZHP Imola Red Build 03/03/03, '06-'15